User manual KYOCERA KM-1820LA QUICK GUIDE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KYOCERA KM-1820LA. We hope that this KYOCERA KM-1820LA user guide will be useful to you.


KYOCERA KM-1820LA QUICK GUIDE: Download the complete user guide (173 Ko)

Manual abstract: user guide KYOCERA KM-1820LAQUICK GUIDE

Detailed instructions for use are in the User's Guide.

[. . . ] · Copying other items may be prohibited. Introduction to this Operation Guide The explanations contained in this operation guide have been separated into different sections in order to allow even those using a copier for the first time to use this machine efficiently, properly and with relative ease. A basic introduction to each section can be found below for reference. Refer to the related section when using this copier. Symbols in this guide This Operation Guide contains certain symbols to indicate points of caution and additional information that is important for you to know. The symbols and their meanings are indicated below. IMPORTANT! Section 1 IMPORTANT! [. . . ] Scanning of the first original will start. NOTE If the optional Document Processor is installed on your copier, all of the originals set there will be scanned and the copy operation will start. 4 Once scanning of the first original is completed, "1-" (the number of originals already scanned) will be shown. Carry out this step as well for the rest of the originals that you want to copy. 5-4 Section 5 COPY FUNCTIONS 4-in-1 Use this mode when you want to copy four originals onto each sheet of copy paper. <When setting the originals in the Document Processor> Original Copy Caution on setting the originals Be sure to set the originals as shown in the following illustrations. <When setting the originals on the platen> NOTES · Make sure the originals are set so that the first page is scanned first. · It is possible to select the order in which the images will appear within the copy page. (See "Selecting the order of 4-in-1 layout" on page 5-7. ) 1 Press the 2in1/4in1 key until the 4in1 indicator lights. NOTE It is possible for you to change the type of borderline. (See "Selecting the borderline" on page 5-6. ) 2 Set the original(s). 5-5 Section 5 COPY FUNCTIONS 3 Press the Start key. Scanning of the first original will start. Selecting the borderline Perform the following procedure when you want to change the type of borderline. NOTE If the optional Document Processor is installed on your copier, all of the originals set there will be scanned and the copy operation will start. 1 Press down on the 2in1/4in1 key for at least 3 seconds. 4 Once scanning of the first original is completed, "1-" (the number of originals already scanned) will be shown. Carry out this step as well for the rest of the originals that you want to copy. 2 Press the Number of Copies / Zoom(+) or the Number of Copies / Zoom(-) key until "F18" (Default item: Borderline) is shown. 5 Once you have finished scanning all of the originals, press the Recall%/Enter key or the 2in1/4in1 key. Copying will start. 3 Press the Recall%/Enter key. 5-6 Section 5 COPY FUNCTIONS 4 Press the Number of Copies / Zoom(+) or the Number of Copies / Zoom(-) key to select the desired borderline. The displayed code numbers refer to the available borderline types as explained in the following table. Selecting the order of 4-in-1 layout Perform the following procedure if you want to select the order in which the images will appear within the copy page in the 4-in-1 mode. 1-: 12 34 2-: 13 24 3-: Code number 123- 1 3 2 4 4-: 1 2 3 4 Borderline types None Solid line Dotted line 1 Press down on the 2in1/4in1 key for at least 3 seconds. 5 Press the Recall%/Enter key. The displayed numbers will flash and the copier will return to a copy-ready state. 2 Press the Number of Copies / Zoom(+) or the Number of Copies / Zoom(-) key until "F17" (Default item: 4-in-1 Layout Order) is shown. 3 Press the Recall%/Enter key. 5-7 Section 5 COPY FUNCTIONS 4 Press the Number of Copies / Zoom(+) or the Number of Copies / Zoom(-) key until the number that corresponds to desired layout order (1 ­ 4) is shown. The displayed code numbers refer to the available layout orders as explained in the following table. 1-: 12 34 2-: 13 24 3-: 1 3 2 4 4-: 1 2 3 4 5 Press the Recall%/Enter key. Sets the location for feeding paper that will be automatically selected at the end of warm-up, or when the Reset/Power key is pressed. * If the optional Paper Feeder is not installed on your copier, this default setting will not appear. Sets whether the Auto Drawer Switching function (see page 2-5) will be used or not. * If the optional Paper Feeder is not installed on your copier, this default setting will not appear. Registers the size of paper that is loaded in the drawer that is included with your copier. Available settings 1-: 1 Lightest 2-: 2 3-: 3* 4-: 4 5-: 5 Darkest 1-: OFF* 2-: Weak 3-: Strong Reference page 6-6 6-9 F08 Black Line Correction 6-6 6-9 F09 Photo Processing 1-: Error diffusion* 2-: Dithering 6-6 6-9 F10 Default Drawer 1-: Upper drawer* 2-: Paper Feeder 6-6 6-9 F11 Auto Drawer Switching ON/OFF ON* OFF 6-6 6-7 F12 Upper Drawer Paper Size -A4: A4 -A5: A5 -Fo: Folio -Lg: Legal -Lt: Letter -o2: Oficio II (Inch specification default: Letter) (Metric specification default: A4) -A4: A4 -A5: A5 -Fo: Folio -Lg: Legal -Lt: Letter -o2: Oficio II (Inch specification default: Letter) (Metric specification default: A4) 6-6 6-9 F13 Paper Feeder Paper Size (option) Registers the size of paper that is loaded in the optional Paper Feeder. * If the optional Paper Feeder is not installed on your copier, this default setting will not appear. 6-6 6-9 6-2 Section 6 COPY DEFAULT SETTINGS Item number F14 Default Multi-Bypass Tray Paper Size Description Registers the size of paper that is to be set on the multi-bypass tray. * The "XXX" shown here refers to the actual width of the paper as registered under the "Non-Standard Size Paper Width" and it is that number which will be shown on the display. Available settings -A4: A4 -A5: A5 -A6: A6 -Fo: Folio -Lg: Legal -St: Statement -Lt: Letter -o2: Oficio II XXX: Non-Standard Size (Inch specification default: Letter) (Metric specification default: A4) Inch specification: 4. 13 ­ 8. 50 (Default: 4. 13) Metric specification: 105 ­ 216 mm (Default: 105 mm) 1 ­ 99 (Default: 99) Reference page 6-6 6-9 F15 Non-Standard Size Paper Width Sets the width of the paper to be set on the multi-bypass tray when that paper is of a non-standard size. * Non-standard size paper of up to 14", or 356 mm, in length can be used. Sets the maximum number of copies or copy sets that can be made at one time. Sets the default order in which the images will appear within the copy page in the 4-in-1 Layout mode (see page 5-1). * Select from between code numbers 1 and 2 when making copies length-wise, and from between code numbers 3 and 4 when making copies width-wise. [. . . ] 6-3 O Off mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7 Off Mode ON/OFF (default setting) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4 Off Mode Time (default setting) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-4 Optional equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE KYOCERA KM-1820LA




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KYOCERA KM-1820LA will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.