User manual KYOCERA FS-C5300DN

[. . . ] 1. 2. ) FS-C5100DN/C5200DN/C5300DN Contents 1 Machine Parts Components at the Front of the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Components at the Left of the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Internal Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Components at the Rear of the Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Use Express Mode for standard connection methods. 1 In the installation method selection window, select Express Mode. The print system detection window appears and the installer detects the connected printers. If the installer does not detect a print system, check that the print system is connected via USB or a network and that it is turned on. Then return to the print system detection window. Note While the information shown in Windows Vista and Windows XP installation dialog boxes differs slightly, the installation procedure is the same. 2 Select the print system to be installed and click Next. Note If the Found New Hardware Wizard appears, click Cancel. If a hardware installation warning message appear, click Continue. 3 You can customize the print system name in the installation settings window. This will be the name displayed in the Printer window and in the printer lists displayed in applications. Specify whether to share the print system name or set the print system as an existing printer and then click Next. IMPORTANT Step 3 only appears if the print system is connected via a network. It does not appear if the print system is connected via a USB. 4 A window appears in which you can check the settings. Check the settings carefully and then click Install. Note If the Windows security window appears, click Install this driver software. 5 A message appears saying that the printer has been installed successfully. Click Exit to exit the printer installation wizard and return the CD-ROM main menu. If the device setup dialog box appears after you click Exit, you can specify the settings for items such as optional features installed in the print system. You can also specify the device settings after you exit the installation. For details, refer to Device Settings in the printer driver operation manual on the CD-ROM. Follow the on-screen instructions to restart the system, if required. 2-12 Printing Operation Custom Mode Use Custom Mode if you want to specify the printer port and select the software to be installed. For example, if you do not want fonts installed on your computer to be replaced, select Custom Mode and deselect the Fonts checkbox in the installation window. 1 Select Custom Mode. 2 Following the instructions in the install wizard window, select the software packages to be installed and the specify the port, etc. For details, refer to Custom Installation in the printer driver operation manual on the CD-ROM. Installation on a Macintosh 1 2 3 4 Turn on the printer and the Macintosh. Double-click either OS X 10. 2 and 10. 3 Only or OS X 10. 4 or higher depending on your Mac OS version. 5 Double-click Kyocera OS X x. x. Printing Operation 2-13 6 The printer driver installation program starts up. 7 Choose Select Destination, Installation Type and then install the printer driver as directed by the instructions in the installation software. Note In addition to Easy Install, the Installation Type options include Custom Install, which allows you to specify the components to be installed. IMPORTANT In the Authenticate screen, enter the name and password used to log in to the operating system. This completes the printer driver installation. If an IP or AppleTalk connection is used, the settings below are required. If a USB connection is used, the printer is automatically recognized and connected. 8 Open System Preferences and click Print & Fax. 9 Click the plus symbol (+) to add the installed printer driver. 2-14 Printing Operation 10Click the IP icon for an IP connection or the AppleTalk icon for an AppleTalk connection and then enter the IP address and printer name. 11Select the installed printer driver and click Add. 12Select the options available for the printer and click Continue. Printing Operation 2-15 13The selected printer is added. This completes the printer setup procedure. 2-16 Printing Operation Printing from Application Software The steps required to print a document created with an application are explained below. You can select the printing Paper Size and Output Destination. 1 2 3 4 Load the paper required into the paper cassette. [. . . ] Expand printer memory. Troubleshooting 4-11 Clearing Paper Jams If the paper jammed in the paper transport system, or no paper sheets were fed at all, the Paper jam message appears and the location of the paper jam (the component where the paper jam has occurred) is also indicated. The printer automatically goes off-line when this message is displayed. After removing jammed paper, the printer will re-start printing. Possible Paper Jam Locations The figure below explains the printer's paper paths including the options. The locations where paper jams might occur are also shown here, with each location explained in the table below. [. . . ]