User manual KYOCERA FS-9120DN

[. . . ] FS-9120DN FS-9520DN Page Printer Please read the Operation Guide before using the printer. The sections of this guide and parts of the printer marked with symbols are safety warnings meant to protect the user, other individuals and surrounding objects, and ensure correct and safe usage of the printer. WARNING: Indicates that serious injury or even death may result from insufficient attention to or incorrect compliance with the related points. CAUTION: Indicates that personal injury or mechanical damage may result from insufficient attention to or incorrect compliance with the related points. [. . . ] The linefeed is ignored. 1 2 Press the MENU key. 7 8 When the desired action is displayed, press the ENTER key. Press the appears. or key repeatedly until Page Set > Page Set Press the MENU key. The message display returns to Ready. > Carriage-Return (CR) Action This procedure instructs the printer what to do when it receives a carriage-return code (character code 0DH). 3 4 Press the key. Press the pears. or key repeatedly until >Wide A4 ap- 1 2 Press the MENU key. >Wide A4 Press the appears. or key repeatedly until Page Set > Off Page Set > 5 Press the ENTER key. A blinking question mark (?) appears. >Wide A4 3 3-30 Press the key. ?Off Chapter 3 Using the Operator Panel 6 7 8 Select On or Off using the or key. 5 Press the ENTER key. A blinking question mark (?) appears. Press the ENTER key. >KIR Mode ?The message display returns to Ready. 6 7 8 Select On or Off using the or key. 2. 2. 8 Setting the Print Quality You can make the following settings to enhance the print quality: Kyocera Image Refinement (KIR), a software algorithm for increasing printout quality; EcoPrint, a printing mode that reduces toner consumption during printing; printing resolution; and Adjustment of Print Density. KIR (Kyocera Image Refinement) This printer incorporates the KIR (Kyocera Image Refinement) smoothing function. At a resolution of 600 dpi this function provides high print quality by providing software enhanced print resolution. Press the ENTER key. Press the MENU key. The message display returns to Ready. EcoPrint The EcoPrint enables you to reduce the amount of toner consumed on the page so as to save your printing costs. (The factory default setting is Off. ) The EcoPrint mode setting is On when the printing image becomes lighter, yet very readable. EcoPrint setting is Off (default) With KIR Off With KIR On (default) EcoPrint setting is On Figure 3-12 NOTE The EcoPrint setting has no effect on the print speed. Figure 3-11 NOTE Set the print density to 3 when setting the KIR mode. You can monitor the KIR test pattern, the last line on a status page, to make the optimum KIR mode setting. 1 2 Press the MENU key. 1 2 Press the MENU key. Press the or key repeatedly until Print Quality > appears. Press the or key repeatedly until Print Quality > appears. Print Quality > Print Quality > 3 4 Press the key. 3 4 Press the key. Press the or Mode appears. key repeatedly until >EcoPrint Press the appears. or key repeatedly until >KIR Mode >EcoPrint Mode Off >KIR Mode On 3-31 Chapter 3 Using the Operator Panel 5 Press the ENTER key. A blinking question mark (?) appears. Adjusting the Print Density The print density can be adjusted in five steps: from 01 (light) to 05 (dark). Off 1 or key. Press the MENU key. 6 7 8 Select On or Off using the 2 Press the or key repeatedly until Print Quality > appears. Press the ENTER key. Print Quality > Press the MENU key. The message display returns to Ready. 3 4 Press the key. Resolution You can set the default print resolution in three ways: 300 dpi, 600 dpi and Fast 1200 mode. The clarity of printed characters and graphics becomes sharper in this order. (The factory setting is Fast 1200 mode. ) Press the or Density appears. key repeatedly until >Print >Print Density 03 1 2 Press the MENU key. Press the or key repeatedly until Print Quality > appears. 5 Press the ENTER key. A blinking question mark (?) appears. >Print Density Print Quality > ?03 3 4 Press the key. 6 key repeatedly until Select the print density from five steps from 01 (light) to 05 (dark) using the or key. Press the ENTER key. Press the or >Resolution appears. 7 8 >Resolution Fast 1200 mode Press the MENU key. The message display returns to Ready. 2. 2. 9 Operating an Option Hard Disk By installing the option hard disk into the printer, the e-MPS function can be used. [. . . ] If there is paper inserted in the MP tray, the first paper will always feed from there even if another paper source is selected. IEEE1284 This is a standard used when connecting a printer to a computer, and was established by the Institute of Electrical and Electronic Engineers in 1994. KIR (Kyocera Image Refinement) This is Kyocera Mita's original smoothing function. It uses software to enhance the printer's resolution and produce high-quality printing. [. . . ]