User manual KYOCERA FS-6970DN

[. . . ] Legal Notes Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change for improvement without notice. We cannot be held liable for any problems arising from the use of this product, regardless of the information herein. Regarding Trademarks Microsoft Windows is a registered trademark of Microsoft Corporation in the U. S. Adobe, Acrobat, Adobe Reader, Photoshop and PostScript® are trademarks of Adobe Systems, Incorporated. [. . . ] Media type This setting selects the Source based on the types of media that are specified in the printing system. Destination This setting specifies which output tray is used for the print job output. Orientation This setting specifies the paper orientation of the print job. If Rotated is selected, the print job orientation is rotated 180 degrees. 4-1 User Guide Basic Copies This setting specifies the number of copies to print. Reverse is available when Printer default is not selected under Destination in the Basic tab. Reverse can be disabled in Device Settings > Compatibility Settings. Duplex This setting lets you print on both sides of a page and select the printed page to appear oriented from a long edge (as bound by a book) or a short edge (as a tablet bound at the top). Quality EcoPrint makes the entire image, text and graphics, appear lighter in the printed job. Note: Some applications may override print settings made in the driver. In Microsoft Word 2007, ensure that Default tray in Options is set to Use printer settings. Source and Media Types In the Basic tab, Source specifies which tray or cassette the printer uses for a printing job. The default is Auto source selection, which instructs the printer to search for the media requested by the application or the printer driver. If the selected tray or cassette empties during a print job, then the printer searches for another source, and continues the job. Media type instructs the printer to search for the type of paper or media that is requested by the application or the printer driver. If Auto media selection is selected, then the printer searches for another tray or cassette using the same media. Transparencies, labels, and envelopes must be supplied from the MP tray. Ensure the paper is properly loaded by following the instructions outlined in the printing system's Operation Guide. Note: Source and Media type are separate items in the dialog box, but can be combined using the Combine source and media type lists setting in Compatibility Settings. To change this setting, open Device Settings > Compatibility Settings and clear the Combine source and media type lists selection. Print Size and Page Size Print Size controls the output page size of the document. To use this setting, ensure that the Page Sizes setting matches the page size setting in your application. If the Print Size is different from the page size in your application, then each page is enlarged or reduced to match the Print Size. The percentage value shown in brackets indicates the size of the Print Size setting relative to the Page Sizes setting. If the Page Sizes does not match the page size setting in the application (the size of the original) then, in most cases the Print Size is ignored and the document prints out based on its original size. [. . . ] The text blends into the background pattern making it nearly invisible when printed. The security watermark appears only when the printed page is photocopied. A security watermark can be used to help protect against unauthorized reproduction of documents, or simply to differentiate original documents from photocopies. SNMP Simple Network Management Protocol. The standard TCP/IP protocol for managing IP network devices, including printing devices. [. . . ]