User manual KYOCERA DF-780

[. . . ] After reading, keep it close to the copier/ printer for easy reference. refer to the Operation Guide for the copier/printer for information on the service representative for your product. The sections of this Operation Guide and parts of this product marked with symbols are safety warnings meant to protect the user, other individuals and surrounding objects, and ensure correct and safe usage of the product. WARNING: Indicates that serious injury or even death may result from insufficient attention to or incorrect compliance with the related points. [. . . ] this is particularly effective if accomplished prior to seasons of high humidity. Consult with your service representative in regard to the cost of cleaning the internal parts of the product as well. Other precautions DO NOT place heavy objects on this product or cause other damage to the product. When lifting or moving the product, contact your service representative. Do not touch electrical parts, such as connectors or printed circuit boards. DO NOT attempt to perform any operations not explained in this Operation Guide. This type of situation presents a danger of fire or electrical shock should any water fall inside. DO NOT place heavy objects on the power cable, pull it, bend it unnecessarily or cause any other type of damage. These types of situations present a danger of fire or electrical shock. NEVER attempt to repair or disassemble this product or its parts as there is a danger of injury or fire or electrical shock. If this product becomes excessively hot, smoke appears, there is an odd smell, or any other abnormal situation arises, there is a danger of fire or electrical shock. Immediately turn the copier/printer OFF (O) at the main power switch and remove the copier/printer power plug from its outlet. ) falls into this product, immediately turn the copier/printer OFF (O) at the main power switch, remove the copier/ printer power plug from its outlet and then contact your service representative. If you continue to use this product without taking these steps, there is a danger of fire or electrical shock. Names of parts (2) Ejection tray extension Pull this extension out when you want to copy or print onto 11" × 17", 8 1/2" × 14", B4 or A3 size paper. (3) Finisher release button Push this button when you want to separate the Document Finisher from the copier (or printer). (4) Top Cover Open this cover if a paper jam occurs inside of the Document Finisher. If finished copies or printouts come out curled or are stacked unevenly, turn the paper in the drawer [cassette] over and reload it. While the Document Finisher is turning the copy or printout over, that paper will be visible (as shown in (1) in the illustration). This mode automatically sorts copies made from multiple originals into identical sets. [. . . ] Then, open the cover plate (A) of the staple cartridge holder and remove any jammed staples. Close the cover (A) plate of the staple cartridge holder into its original position. The staple cartridge holder will click into place when it has been inserted correctly. Floor model One 64 to 105 g/m² (When using under 90 g/m² weight paper) When NOT stapling Folio, 11" × 17", 8 1/2" × 14", 8 1/2" × 13 1/2", 8 1/2" × 13", A3, B4 or 8K: 500 sheets 8 1/2" × 11"*, 11" × 8 1/2", 7 1/4" × 10 1/2", A4, A4R*, B5, B5R or 16K: 1000 sheets When stapling 2 to 10 sheets A3, B4, 11" × 17", 8 1/2" × 14", 8K: 30 sets A4R, 8 1/2" × 11", B5R: 40 sets A4, 11" × 8 1/2", 16K: 45 sets B5: 50 sets When stapling 11 to 20 sheets A3, B4, 11" × 17", 8 1/2" × 14", 8K: 12 sets A4R, 8 1/2" × 11", B5R: 35 sets A4, B5, 11" × 8 1/2", 16K: 40 sets When stapling 21 to 25 sheets A3, B4, 11" × 17", 8 1/2" × 14", 8K: 10 sets A4, A4R, B5, B5R, 8 1/2" × 11", 11" × 8 1/2", 16K: 30 sets When stapling 26 to 30 sheets A4, A4R, B5, B5R, 8 1/2" × 11", 11" × 8 1/2", 16K: 30 sets When stapling 31 to 50 sheets A4, A4R, B5, B5R, 8 1/2" × 11", 11" × 8 1/2", 16K: 20 sets Stapling capacity . [. . . ]