User manual KYOCERA DF-600

[. . . ] After reading, maintain it in good condition and keep it together with the Operation Guide for your copier. DF-600 is written as Single-staple model and DF-610 is written as Double-staple model. After reading, maintain it in good condition and keep it together with the Operation Guide for your copier. Refer to the Operation Guide for your copier for information on the service representative for your product. [. . . ] * Paper sizes that can be used for sorting: 11"x17", 8 1/2"x14", 8 1/2"x11", 11"x8 1/2", A3, B4, A4, A4R, B5 * Refer to the Instruction Handbook for your copier for more detailed information on the acceptable number of originals that can be set in the Document Processor. * When setting an original on the platen, a message will appear after each original is scanned to confirm whether you want to scan another original or not. Each set of copies can be shifted from the previous set and ejected to Tray A. * The maximum number of copies that can be stored on the Tray A and the Tray B will differ depending on the size of copy paper that is being used. * Refer to the Operation Guide of your copier for more detailed information on selecting the desired copy mode. * Paper sizes that can be used for grouping: 11"x17", 8 1/2"x14", 8 1/2"x11", 11"x8 1/2", A3, B4, A4, A4R, B5 Each set of copies can be shifted from the previous set and ejected to Tray A. * Even if the number of copies exceeds the limit for grouping (Refer to page 75. ), copies of the preset number will be shifted from the previous set and ejected. * The maximum number of copies that can be stored on the Tray A and the Tray B will differ depending on the size of copy paper that is being used. * Refer to the Operation Guide of your copier for more detailed information on selecting the desired copy mode. * Stapling capacity: <Upper left, single staple> 11"x17", 8 1/2"x14", A3, B4: 30 sheets 8 1/2"x11", 11"x8 1/2", A4, A4R, B5: 50 sheets <Upper right, single staple> (Double-staple model only) 11"x17", 8 1/2"x14", A3, B4: 30 sheets 8 1/2"x11", 11"x8 1/2", A4, A4R: 50 sheets * When setting an original on the platen, a message will appear after each original is scanned to confirm whether you want to scan another original or not. * The maximum number of copies that can be stored on the Tray A will differ depending on the size of copy paper that is being used. Select the Interrupt copy mode on the operation panel of your copier and perform the appropriate procedure to start copying. * Refer to the Operation Guide of your copier for more detailed information on the Interrupt copy mode. After Interrupt copying is completed, perform the required operation on your copier to release the Interrupt copy mode. * The Single-staple model is equipped with a Staple holder A, and the Double-staple model is equipped with a Staple holder B and Staple holder A. The procedures for adding staples and removing staple jams are the same in the two models. Refilling the Stapling unit If a message appears on the copier indicating that staples have run out, the staple holder(s) need to be replenished with staples. * For a double-staple model with a centerfolding unit (option) installed Turn the Unit release lever, and hold the Unit release handle to move the Center-folding unit in the paper ejection direction. Grasp the internal tray handle and carefully pull the internal tray out towards you. * Refer to the Operation Guide of your copier for more detailed information on selecting the desired copy mode. * The copy paper sizes that are acceptable for hole-punching and the available positioning and number of holes differs depending on the specifications for your unit. [. . . ] G Paper jam in the conveyor section of optional Center-folding unit When the display shown in the figure above appears, there is a paper jam in the conveyor section of the Center-folding unit. Turn the Unit release lever, and hold the Unit release handle to move the Center-folding unit in the paper ejection direction. If paper is seen from under the Internal tray, remove the jammed paper. If a paper jam occurs in the Internal tray, hold the Internal tray handle and gently pull out the Internal tray toward you. [. . . ]