User manual KYOCERA AI 5050

[. . . ] ) has determined that this product meets the ENERGY STAR guidelines for energy efficiency. Specific matters for 50 ppm copier are covered on page 194 and thereafter. The sections of this handbook and parts of the copier marked with symbols are safety warnings meant to protect the user, other individuals and surrounding objects, and ensure correct and safe usage of the copier. DANGER: Indicates that serious injury or even death will very possibly result from insufficient attention to or incorrect compliance with the related points. [. . . ] Q Printing size standardization Different sizes of originals will be reduced/enlarged to be copied on the desired same size sheets of paper. Q Choose size When an original is set on the platen, all originals will be stored in memory once, then, copied at a time. Check if the "Memory copy from DF and Platen" key is highlighted. Select the function by touching the "Large # of originals" key, "Auto size" key or "Choose size" key. Select the finishing of copy by touching the "2sided copy" key or "1sided copy" key. When setting the custom paper size or the custom zoom ratio, touch the Manual key until "1:1" is displayed on the zoom ratio display. * When changing the zoom ratio, touch the "+" key or "-" key on the right side of the zoom ratio display. When setting the zoom mode, such as standard zoom or XY zoom, touch the "Zoom" key and follow the instruction on page 48 and after. * When setting the border erase mode, touch the "+" key or "-" key on the right side of the display of the width of erasing border to set the width of erasing border. * The border erase mode in this setting is effective only for the sheet originals. * When setting margin mode, touch the "Margin" key and follow step 4 and after on page 58. When continuing to read originals, touch the "Continue" key to repeat from step 6. * To clear the last page of originals read, touch the "Clear Last Job" key. When the test print is completed, the display will return to the screen in step 9. * If an optional finisher is equipped, the setting of staple mode and punch mode can be changed in the same manner as with sorter mode setting. Set the number of copies by touch the "+" key or "-" key. 2 Two-sided copies from one-sided and two-sided mixed originals q Finishing like originals [Print as original] One-sided originals and two-sided originals are set and read by each; onesided originals are copied as one-sided, and two-sided originals are copied as 2-sided copies to Finish same as originals. Q Two-sided copies from all originals [Duplex all originals] One-sided originals and two-sided originals are set and read by each, and all originals are finished as two-sided copies without making blank pages. Q Copying desired page on the front side [Chapterize] The first page of each chapter can be copied onto the front side by setting the originals to be read by chapter. Select the function by touching the "Print as originals" key, "Duplex All Originals" key or "Chapterize 1/2 Sided Org. When setting the custom paper size or the custom zoom ratio, touch the manual key until "1:1" is displayed on the zoom ratio display. * When changing the zoom ratio, touch the "+" key or "-" key on the right side of the zoom ratio display. [. . . ] Unscrew the two reversing cover screws d located on the left side of the duplex unit. Close the reversing cover and fix it with the 2 reversing cover screws. * If the paper does tear, remove any scraps of torn paper from inside the copier. The platen: Sheets of paper, and books, 3-dimensional (Maximum originals size: 11" x 17") DF: Sheets of paper (11" x 17" - 81/2" x 51/2", one-sided original: 35 g/m2 - 160 g/m2, two-sided original: 50 g/m2 - 120 g/m2) Copy sizes . [. . . ]