User manual KRUPS YY8201 FD

[. . . ] Com F I E P D GB NL DK N S FIN Position for 1 Position for 2 Français Nous vous remercions de votre confiance et de votre fidélité aux produits Krups. 50 English Your machine is equipped with a filter holder which boasts three exclusive systems: - One for the gradual tamping of the espresso ground coffee as the filter holder is being positioned (KTS "Krups Tamping System"). It is also removable, and so can be frequently cleaned to be maintained in perfect working order. For your safety, your filter holder is equipped with a locking system to keep it in place when the pressure rises. [. . . ] wITH A SOFT POD Your machine is also compatible with soft pods (usually 60 mm in diameter). Given that this kind of pod is not specifically designed for espresso machines, you will get a less full-bodied espresso than with an E. If the pod is not positioned correctly, the result in the cup will not be satisfactory. STEAM FUNCTION Steam is used to foam up milk (for example to make a cappuccino or a cafe latte) thanks to the cappuccino accessory. After using the steam function, the appliance cools automatically by pumping cold water through the heating system. During the pumping cycles, the excess steam in the heating system is released with the hot water into the drip tray. The steam and noise that accompany this phase are important for cooling the appliance. Warning: during and after using the appliance, the metal parts of the steam nozzle can become very hot. USING THE STEAM NOZZLE TO FROTH MILK Fill the water tank and turn the machine on (fig. Pour 60 to 100ml of fresh skimmed, semi skimmed or whole milk in a small container of about 1/2 litre and which can pass under the steam nozzle. We recommend that you use pasteurised or UHT milk and that you avoid using unpasteurised milk. As soon as the indicator lamp stops blinking, plunge the steam nozzle into the milk. For a good result, hold the nozzle towards the bottom of the container for about 25 seconds while the milk heats (without however touching the bottom of the container). Then, bring the container down gradually so that the nozzle moves up towards the surface (without ever coming out of the milk) (fig. Once the froth has formed, turn the switch to the “stop” position (fig. The appliance will now automatically cool itself by launching 3 intermittent pumping cycles. Important: To prevent the cappuccino accessory holes from being clogged, the milk foam must not reach the black plastic ring. It is important to clean the cappuccino accessory after each use to prevent the milk from drying on the inside. Once the light has stopped blinking, turn the switch to the "steam" position (to remove the remaining milk) and run the steam for 30 seconds. For thorough cleaning of the cappuccino accessory, see paragraph 8, "Cleaning and Maintenance". 55 English USING THE KRUPS XS-6000 AUTO-CAPPUCCINO SET TO FROTH MILK (SOLD SEPARATELY) The auto-cappuccino accessory makes it easier to make a cappuccino or a caffe latte. It is made up of a special dual-position nozzle, a stainless steel milk container and a pipe. [. . . ] The filter holder is blocked Possible causes The cups and the filter holder are cold. solutions Preheat the accessories: cups and filter holder (see paragraph 6). Tighten the filter holder by turning it to the right as far as it will go, up to the stop. When the appliance has cooled, clean the percolation head with a damp cloth. [. . . ]