User manual KRUPS C50

[. . . ] First read the safety precautions to avoid risks of fatal electrical shock and fire. Insert the remaining cable in the guide under water tank left or right socket, depending on the position chosen for the water tank. [. . . ] Press and hold the Ristretto & Lungo controls together for at least 6 sec. n’immergez jamais la machine dans l’eau , en totalité ou en partie. Read the safety precautions on the descaling package and refer to the table for the frequency of use (see Descaling section in this manual). 13 14 Videz le bac d’égouttage et le conteneur de capsules usagées. remplissez le réservoir d’eau de 0 , 5 l d’eau et ajoutez le liquide de détartrage Nespresso. Fill the water tank with 1 unit of Nespresso descaling liquid and add 0. Activate the machine by either pushing the slider or one of the cup selection touches. To enter the descaling mode, push all the 3 controls simultaneously for at least 3sec. Refill the water tank with the used descaling solution collected in the container and touch any control to repeat the procedure. Empty and rinse the water tank, capsule container, drip tray and cup support thoroughly. To exit the descaling mode, push all the 3 controls simultaneously for at least 3sec. Never use any product other than the Nespresso descaling kit available at the Nespresso Club to avoid damage to your machine. The following table will indicate the descaling frequency required for the optimum performance of your machine, based on water hardness. For any additional questions you may have regarding descaling, please contact your Nespresso Club. [. . . ] Except to the extent allowed by applicable law, the terms of this limited warranty do not exclude, restrict or modify, and are in addition to, the mandatory statutory rights applicable to the sale of the product to you. If you believe your product is defective, contact Krups for instructions on where to send or bring it for repair. [. . . ]