User manual KRUPS 969

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KRUPS 969. We hope that this KRUPS 969 user guide will be useful to you.


KRUPS 969 : Download the complete user guide (540 Ko)

Manual abstract: user guide KRUPS 969

Detailed instructions for use are in the User's Guide.

[. . . ] Do not operate any appliance with a damaged cord in order to avoid a hazard or plug or after the appliance malfunctions, or has been damaged in any manner. Return appliance to your nearest authorized KRUPS Service Center for examination, repair or adjustment (see Limited Warranty). The use of accessory attachment not recommended by KRUPS may result in fire, electric shock or injury to persons. Do not let cord hang over edge of table or counter or touch hot surfaces. [. . . ] As soon as the start/stop switch begins to glow continuously, the coffee selection buttons will glow continuously. the machine is ready to operate · Pressing the button for two coffees (10) will now cause water to run through the machines pipes. Using the various functions of your espresso machine For best results, we recommend that you first pre-heat the accessories (filter holder, filter basket and cups) without putting in ground coffee. to do this : · Fill the water container with fresh, cold water (1) (2) (3) and turn on the machine (4). Put the filter holder and an empty filter basket in place (6) (7), and place the espresso cups underneath. As soon as the coffee selection buttons begin to glow continuously, the machine is ready to operate. After making your first espresso and the machine is warmed, the espresso cups can then be pre-heated on the cup warming plate. Fill the water container (1) (2) (3) and turn Put the filter basket for one or two cups into Place some ground coffee in the filter basket (1 or 2 measuring scoops), and then tamp it down firmly; the coffee should reach the lip of the filter (11) (12). As soon as the coffee selection buttons begin to glow continuously, the machine is ready to operate Your machine is already preprogrammed for the preparation of one or two cups of espresso. Press your choice of coffee size by pressing or the respective coffee selection button (9) (10). When the programmed quantity is reached, espresso stops running automaticly. When the desired quantity of water has run through, stop the machine by pressing again the hot water button (15). The thumping noise which occurs while steam is being produced comes from the intermittent regulation of the pump and has no effect on the proper working of the machine. Caution: during and after use of the machine, the metallic parts of the auto cappuccino accessory can become extremly hot. The milk container must also be cold (do not run it under hot water before frothing the milk). Using the Auto Cappuccino accessory The auto cappuccino accessory makes it easy to produce steamed frothy milk for making cappuccino, latte or even hot chocolate. Fill the water container with fresh, cold water (1) (2) (3) and turn on the machine (4). Insert the flexible tube into this container or directly in the milk (17a). Please note the straight cut end of tube must fit inside auto cappuccino device and irregular end dipped in the milk. When the machine is ready (start/stop switch glows continously), press the steam button (16), and it will begin to blink. When the steam button glows continuously again, the machine is now ready for steam. Once the desired level of froth has been produced, press the steam button again to (16) . [. . . ] Stop the machine by pressing the start/stop switch (4) and wait for 10 - 15 minutes to allow the descaler to take effect. Next, start the machine again (4) and allow the rest of the liquid to run through by pressing the coffee button (10) as many times as necessary. Then rinse with two water containers of fresh water, clean the brewing head and replace the grid on the head of the machine (see section on Cleaning the Machine). The filter holder is not mounted correctly or has not been tightened sufficiently. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE KRUPS 969




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KRUPS 969 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.