User manual KRUPS 880

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KRUPS 880. We hope that this KRUPS 880 user guide will be useful to you.


KRUPS 880 : Download the complete user guide (670 Ko)

You may also download the following manuals related to this product:

   KRUPS 880 MANUAL 2 (323 ko)

Manual abstract: user guide KRUPS 880

Detailed instructions for use are in the User's Guide.

[. . . ] Check that the voltage of your appliance is the same as the voltage supplied to your outlet. The length of the cord was selected to reduce the chances of accident. If using an extension cord, its electrical capacity must equal or be greater than that of the appliance. If the appliance is a grounded model, the extension must have three conductors, one of which is grounded. [. . . ] Yourappliance is now ready for use. prepare two espressos simultaneously: . To . Pl . Choose . Pr ace two cups under the coffee spigot (t). the quantity of coffee desired per cup with the cup fill quantity knob (d4). The indicator light will flash twice. The appliance will grind two lots of coffee seperately. The flow of coffee/espresso will thus occur automatically in two stages. t until the end of the second flow, and you can now enjoy your espressos. . Wai . THE FROTH STEAM FUNCTION . THE ESPRESSO FUNCTION Youhave now prepared your appliance for use. The indicator lights on the controls (d1) and (d2) are lit and the water tank and the coffee bean compartment have been filled. You can adjust the height of the flow depending on the size of the cup being used (4). The minimum setting corresponds to 30 ml (about 10z. ) and the maximum setting to 250 ml (about 8. 5oz. ). While the coffee/espresso is flowing, you can increase or reduce the quantity selected by turning the quantity knob (d4) to the right or to the left. . Placea . Usi . Presst . Wai Steam is used to froth milkto whip up a cappuccino and is also used for heating liquids. As the production of steam requiresa higher temperature, the appliance allowsfor a pre-heating phase to build-up the steam. The indicator light willflash and the indicator light of the coffee button (d2) will go out. When the indicator light of the steam selection control (d3) becomes steady, the. Frothing the milk to make a cappuccino A cappuccino consists of one third coffee. nozzle on~ by turning the steam selector knob towards you (8). 12KRUPS . Once the container has been filled with sufficient hot water, return the tap (e) to the "off" position. ace the grid on the tray. he tray is pushed in all the way or the warning light will not go out. The adjustable spigot for coffee (f) You can remove the adjustable outlet for coffee to clean it. The appliance must be switched off and unplugged. . Pl . Makesuret . . Tocl . Do . ean the appliance, allow it to cool down. unplug it and not wash the various accessories of your appliance in the dishwasher. . Open . Cl The body of the appliance . Cl ean this using a damp cloth. Do not use tools or cleaning products which might scratch the bodywork. . Remove the service hatch (p). the support tabs which hold the coffee outlet (f) and pull them upwards (11). You will hear a "click" as it locks. The water tank (a) . Empt y the water tank daily and refill with fresh water as necessary. It is not advisable to allow water to stagnate for a long period in the tank. If the appliance is not to be used for long periods, drain and leave empty. . Repl . Cl ose the service hatch, plug in the appliance and press the On I Off button (d 1) to restart. The compartment for used coffee grounds (m) Youmust empty the coffee grounds in the compartment relativelyfrequently. Carefullycheck the composition 01 the descaling products which you intend to use. [. . . ] After transport, it will be necessary to restart the heating system (see "Starting the heating system"). . Ret ain and re-use the original packaging to Fillit and restart the appliance (see «Preparing the appfiance» ) isempty The coffee beans compartment Fill it with beans The packaging consists solelyof materials which pose no risk to the environment, and which can be disposed of in accordance with the regulations on recyclingin force. To dispose of the appliance, contact the appropriate department of your local authority. for further information. (b) is empty Hot water or steam does not come out of the The nozzle for steam!hot water Unblodc the hole in the nozzle with a isblocked fine needle steam Ihot water nozzle (g) The coffee runs too fast The coffee runs too slowly or with YourKRUPS #905 iscoveredbythe following Reduce the setting of the fineness adjustment knob (bI) Increasethe setting of the fineness adjustment knob (hI) Descale it. See section «Descaling» Referto the section «Returning to espresso or hot wate The ground coffee is not fine enough The ground coffee is too fine difficulty The appliance needs to be descaled The espresso and/or hot water functions do not work steam Youhave just made function. The milk does not The milk is not fresh or has the wrong content of fat The milk is too hot Change to lowfat froth milk Cool it in the warranty: Iffrom date of purchase within one year this KRUPS productfailsto functionbecauseof defectsin materialsor workmanship, RUPS K North America will, at its option, repair or replace the unit with our charge, provided the owner has a proof of date of purchase. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE KRUPS 880




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KRUPS 880 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.