User manual KRUPS 452

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KRUPS 452. We hope that this KRUPS 452 user guide will be useful to you.


KRUPS 452 : Download the complete user guide (208 Ko)

Manual abstract: user guide KRUPS 452

Detailed instructions for use are in the User's Guide.

[. . . ] Empty the Fill tank coffee grounds collector The appliance is ready for a coffee or steam cycle. Empty the coffee grounds collector + clean the drawer + empty the drip tray. Check coffee grounds collector is not missing or incorrectly positioned. Rinsing cycle or scale removal cycle: request to empty water tank, rinse it and fill with fresh water. [. . . ] You can modify these settings at any time by repeating these operations. Do not fill the water tank with hot water, mineral water, milk or any other liquid. If you turn on the appliance when the water tank is not in place or not correctly filled (under the "min. " level, ), the "fill water tank" light will come on and making an espresso or a cup of coffee will be made impossible. It is recommended that you do not use oily, caramelised or flavoured coffee beans for this machine. Check that the coffee beans do not contain any foreign particles such as grit, as any damage caused by the presence of foreign particles will negate the warranty. Remember to fit the drip tray to avoid waste water flowing onto the work surface and staining it or scalding you. Press the 'Service' button quickly to start a coffee circuit rinsing cycle, which will automatically stop after around 40 mL. Rinsing out the steam circuit: Press the 'Service' button for 3 seconds to start a steam circuit rinsing cycle, which will automatically stop after around 300 mL. It is preferable to rinse the 2 circuits out at least once after the machine has not been used for several days. Each time you plug your machine in, it will carry out an initialisation cycle. Wash it out with water and a little washing up liquid and a small non-abrasive brush. Before putting it back, ensure that the air inlet holes are not blocked by any milk residues. This auto-cappuccino accessory makes it easier to make a cappuccino or a caffe latte. Fill up the milk pot and place a cup or a glass underneath the autocappuccino nozzle. Press the button to start and then to stop the cycle Place your cup under the coffee outlets and start a coffee / espresso cycle. To prevent milk from drying on the auto-cappuccino accessory, it must be cleaned thoroughly. It is recommend that you wash it immediately by carrying out a cycle with steam and the accessory pot filled with water in order to clean the inside of the nozzle. To do so, you can use liquid cleaner XS4000, available as an accessory. The drip tray receives waste water and the coffee grounds collector receives used coffee grounds. If there is not enough water in the water tank when you start the program, the light will come on to warn you. add the appropriate amount of water to the container and cleaning will continue automatically. [. . . ] Check that the coffee bean compartment contains coffee and that it is running through properly. Turn the fineness of grind button to the left to obtain a finer grind. Turn the fineness of grind button to the right to obtain a coarser grind (may depend on the kind of coffee being used). Turn the fineness of grind button to the left to obtain a finer grind. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE KRUPS 452




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KRUPS 452 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.