User manual KRUPS 171

[. . . ] S Neither you nor the mains flex should ever touch hot parts of the appliance. S Never dip the appliance, the flex or the mains plug into water or any other liquid. S Keep the appliance out of the reach of children and do not let the flex hang down. S Do not use the appliance if the mains flex or the appliance itself is damaged. [. . . ] The simultaneous preparation of two cups of strong espresso or coffee is not possible. If you accidentally actuate the key, you can cancel the action by pressing the or the key. Place a receptacle beneath the espresso delivery pipe, however, as a little water will run out. Using ready-ground coffee-meal You have already prepared the appliance. When the rinsing process is finished, the following lamps will glow: "rinse"; "1 cup normal"; "1 cup strong"; "2 cups"; "coffee-meal". S Open the lid of the coffee feed funnel and put in one or two level measuring spoonfuls of espresso- or coffee-meal (16). Do not put more than two level measuring spoonfuls into the feed funnel. Neither should you put in less than one level measuring spoonful, otherwise the espresso or coffee delivery will be automatically interrupted. Appliance indicator(s) Breaking off the brewing process If you wish to break off the brewing process before it is completed, actuate any one of the following keys: , , , or . The process then will be stopped and the spent coffee automatically thrown out. Emptying the spent coffee holder and the drawer The spent coffee holder receives the used coffee-meal and the drawer takes up any remaining water. S To remove any eventual residues from the steam nozzle, place a receptacle beneath the nozzle and turn the knob for steam/hot water to the position for just a moment. Concluding the production of steam The preparedness of the appliance to produce steam can be cancelled in 2 different ways: 1. s After steam has been produced , turn the selector knob for steam/hot water to the position. After about 10 minutes, the appliance will automatically cease to be ready for steam production and the "ON/OFF"and "steam" indicators will blink. If you want to prepare espresso or coffee immediately after producing steam: s After the steam has been produced, turn the selector knob for steam/hot water to the position. Turn off the steam pre-selection by pressing the steam pre-selector key , whereby the "ON/OFF" and "steam" indicators will blink. In order to prepare espresso or coffee as usual, you must either cool down the appliance from the steam temperature to the espresso and coffee temperature, or fill the heating system. S Return the selector knob for steam/hot water to the position, whereby the "ON/OFF", "rinse", "1 cup normal", "1 cup strong", "2 cups" and "coffee-meal" indicators will glow. With this appliance, you can prepare hot water for making instant drinks, etc. S Place a cup beneath the steam nozzle and turn the selector knob for steam/hot water to the position. S When the cup is sufficiently filled with hot water, return the selector knob to the position. [. . . ] The "ON/OFF", "empty spent coffee holder" and "remove lime-scale" indicators will glow, as will also the "fill water tank" indicator if there is no or very little water in the tank. S Empty the drawer and the spent coffee holder and return them to the appliance. S Dissolve 4 level tablespoonfuls (about 40 g) of the lime-scale removal material in 1/2 a litre of lukewarm water and pour the solution into the water tank. S Place a sufficiently large receptacle (at least 300 ml capacity) beneath the steam pipe. [. . . ]