User manual KORG X3R BASIC GUIDE

[. . . ] Then contact your nearest Korg dealer or the store where the equipment was purchased. Do not connect it to an AC outlet of voltage other than that for which your unit is intended. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] When you select SONG (Song play), there will be a pre-count and then playback will begin automatically. If you press and hold the ENTER/REC button for one second or longer, you'll return to the beginning of the demo song and begin playback. While playing or stopped, you can use the / CURSOR to change programs. Bass key Step number Use the /® CURSOR to select a parameter, and use the Value encoder to specify the value. Level Use the Value encoder to set the level of Rhythm & Bass sound (p. Song Select Use the Value encoder to select the demo song you want to hear. If you select the "FIL" setting, the demo song will play at the tempo specified by the song itself (p. An audio source from the AUX jack and USB Connector, a phrase you play on your guitar or bass, or the rhythm you specified in Rhythm & Bass mode can be recorded, and played back repeatedly as a loop. This provides a convenient way to practice by playing along with the repeating phrase. You can slow down the playback speed without affecting the pitch, which can help you to learn difficult phrases. If your computer is running Windows XP, and you want to transfer audio data via the USB connector, we recommend that you install the KORG USB-ASIO driver (provided on the included CD-ROM). You can choose from six levels of playback speed: 100%, 90%, 80%, 75%, 66%, and 50%. During playback, you can hold down the CURSOR to rewind, or hold down the ® CURSOR to fast-forward. By pressing the PHRASE TRAINER button, you can hold the sound that was being played at the moment you pressed the button (the Hold function). This is convenient when you need to hear individual notes in a phrase. " screen will be available from the recording mode screen if you've just recorded a phrase. If you turn off the power without saving, the recorded phrase will be erased. Pressing the CURSOR while playback is paused will return you to the beginning of the recorded phrase. In this mode you can turn each effect on/off, and edit the effect type, parameter values, and program name. in Play mode , press the ® CURSOR to access the DYNA effect edit screen. In any screen of Edit mode, you can use the Control dials to edit the Amp models, or use the TAP/BYPASS button to set the delay time. The edited settings will return to the settings of the original program if you switch programs or turn off the power without Writing (p. [. . . ] For example if you select a pitch shift of a 3rd up in a major key (MAJ3UP), the amount of pitch shift will vary automatically between three semitones (a minor third) and four semitones (a major third). ⷠWhen MAJ3UP is used with a key setting of C The pitch created by the intelligent pitch shifter is shown in parenthesis ( ). The PX5D provides seven types of intelligent pitch shifting, with intervals of a 3rd, 4th, 5th, and 6th. (For the 3rd, you can select either the upper or lower part, and a major or minor key. [. . . ]