User manual KORG X-911 SERVICE MANUAL

[. . . ] 5. [METER] Meter Track View The Meter Track View displays regions of audio, levels for playback tracks, effects, output levels as well as the currently selected virtual tracks, track names and locate points. Press the [METER] key in the lower right corner of the adjustable display. You can change this view to display CH-Input, Pre or Post Fader meter levels, and also select your choice of Track or Fader views. Try it: Press the " " popup button in the upper left corner of the display under Select View: press "FaderView" then press "OK". [. . . ] Select track "8" for the "Source" and select track "8" for "Destination" " "Exec" then press "Yes" and then "OK". Press the " " popup button in the upper left corner of the display and select "EraseTrk" from the list, and then press "OK" for "Destination" select track "8" press "Exec" then "Yes" and then "OK". Press the [ ] key to playback the song and hear the result. 7. ! You can undo edits or recording (Up to 16 levels) by pressing the [UNDO] key, and then select the level and press "Undo". [SCENE] Scene Automation With the scene automation a song can contain 100 "snapshots" of the mixer settings. Fader, Pan, EQ and effects settings are stored with a scene and can be recalled automatically during playback. press the "FADER/PAN AUTOMATION" button in the display then press the "Mixer View" Press the [<] [MARK JUMP] key to return to the beginning of the song. Push faders 1-8 and the MASTER fader all the way up then all the way back down. When the song is played back you will see the on screen faders return to their settings stored in the scene. Press the [ ] key and watch the display. 3 X-911 EasyStart Creating and deleting Scenes: 1. Press the [ ] key and let the song playback for about 10 seconds then press [ ]. Rename it by pressing "Scene_002" in the display then press the "Rename" button in the display. You can make changes to a scene by making the desired adjustments and pressing "OverWrite" in the display. Press the " " popup button in the lower left of the display (Metro04 L1 is currently selected). Audition some of the patterns by pressing to select them in the display, and by using the <scroll bar> or the DIAL. When finished, press "Cancel", and then press "Prev))" to turn previewing off. In a 24Bit 96kHz song, you will only be able to select Metro, Hi Hat and Blank. ( In the following section, you can try them all) ! Creating and Working with a New X-911 Song In this section, you will go through the basic steps of creating a new song: Assigning the input, applying effects and EQ to your input source, basic recording procedures, as well as mixing down, burning a CD and backing up your song to a computer. You will need a guitar or microphone and a blank CD-R for this section. Select a new song: 1. Press the [SONG] key, and then press the "SelectSong" tab in the display. Press the "New" button in the display select the "New Song Type" as "44. 1kHz / 16bit" press "OK". The display will indicate "00X: Song00X" - the next available empty song location. The New Song Type setting you've just selected is one of five selections specifiying the sampling frequency and bit depth available for recording. Both 44. 1kHz/16 bit and 48kHz/16bit allow for 16 track simultaneous recording/playback (with the optional AIB-8 board). (For more information on Song Type settings, see the Owner's Manual page 135) Rename the song by pressing "Rename" in the display. [. . . ] Press the "Add" button in the display select the song "QUICKTOUR" press "OK", and then press "Yes". Press the "Write to CD" button in the display, and then press "Yes". The display will indicate "Making Image File", followed by "Writing CD" when propted "Write Another CD?" press "No". To listen to the CD on the X-911, press the [CD] key then press the play " " button in the display. [. . . ]