User manual KORG WAVEDRUM MINI

[. . . ] 11 3 Deutsch Table Of Contents Français English Thank you for purchasing the Korg WAVEDRUM Mini dynamic percussion synthesizer. to help you get the most out of your new  instrument ,  please read this manual carefully. THE FCC REGULATION WARNING (for USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] You won't be able to switch sounds if the CLIP, PAD, 'a', or 'b' indicators are blinking (Edit mode). In this case, press the CLIP/PAD button to make the indicator light up. Button, the number Strike the pad or the object to where the clip is attached, and listen to the sound you've selected. Note: Immediately after the power is turned on, sound 00 will be selected for both the pad and the clip. Note: You can also exit Edit mode by pressing the , , or + buttons as well as the CLIP/PAD button. 11 Voice Name Deutsch Selecting sounds Français Rhythm pattern / Looper transport English Performing Using effects Here's how to apply an effect to the sound. Each time you press it, the effect setting will cycle through effect 'a' (the 'a' indicator lit), effect 'b' (the 'b' indicator lit), and off (both indicators 'a' and 'b' unlit). You won't be able to switch effects if the CLIP, PAD, 'a', or 'b' indicators are blinking (Edit mode). In this case, press the CLIP/PAD button to make the indicator light up. Note: You can assign different effect types to effects 'a' and 'b'. You can also adjust settings such as the amount of effect that will be applied. For details on these settings, refer to “Editing the settings” (See page 14). Note: Immediately after the power is turned on, the effect will be off. 'a' and 'b' will remember the settings that you had last specified before turning the power off. Note: You can also exit Edit mode by pressing the , , or + buttons as well as the CLIP/PAD button. By holding down the + button, you can step through the rhythm patterns. The pattern number in the display will blink while the rhythm pattern is switching. Once the change has occurred, the display will revert to indicating the sound number. For details on each rhythm pattern, refer to “Rhythm Patterns” (See page 69). Strike the pad or the object where the clip is attached; your performance will be recorded. If you press the button, recording will end and playback will continue. You can repeat the above steps to overdub your performance as many times as you wish. [. . . ] Initialize the data as described in “Restoring the factory settings” above. Immediately stop using the WAVEDRUM Mini, and contact your nearby Korg dealer. Can't select sounds or effects Could the CLIP or PAD indicators of the buttons on the left of the control panel be blinking?Press one of the CLIP/PAD, , , or + buttons to make the indicator change from blinking to steadily lit. [. . . ]