User manual KORG T3EX BROCHURE

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. [. . . ] Turn the P-dial to specify the amount of time until the backlight will turn off. To turn the backlight on, select "ON" in the same way. Push Push Push 4. Press the P-dial (or the menu button) to complete the backlight setting. Alternatively, you can press the P-dial to complete the setting. 26 Auto shutdown setting If no operations have been performed for the length of time you specify here, the shutdown screen will appear automatically, and the power will turn off several seconds after that. This will prevent the battery from running down in the event you forget to turn off the power. Press the menu button, and in the menu list (MENU) screen, use the P-dial to select and confirm "SYSTEM. " The system setting (SYSTEM) screen will appear. Use the P-dial to select and confirm "AutoShutDown. " The selection icon will change from " " to " ", and the setting will be highlighted. Turn the P-dial to specify the time until when the power will turn off. If this is set "OFF" the power will stay on; Auto shutdown will not occur. Push Push Push 4. Press the P-dial (or the menu button) to complete the Auto shutdown setting. The selection icon will change from " " to " ". LED setting Normally, the recording LED will light while recording, but you can reduce the power consumption even further by turning this LED function off. The project/file edit screen will appear, with the name of the project you just selected shown at the top. Turn the P-dial to move the selection icon to "Protect. " Push 5. Each time you press the P-dial, the setting will alternate between protecting ( ) and un-protecting ( ) the project. When you've finished making the setting, press the menu button to return to the library select (LIBRARY) screen. Deleting a project/file Here's how to delete a file. Once you've deleted a file, it cannot be recovered, so use this operation with care. Press the menu button, and in the menu list (MENU) screen, use the P-dial to select and confirm "LIBRARY. " The library select (LIBRARY) screen will appear. Use the P-dial to select and confirm the project/file that you want to delete. (See "Selecting and playing back a project/file, " p. 18 ) To delete the currently selected project/file, simply press the P-dial twice. The project/file edit screen will appear, with the name of the currently selected and confirmed project/file shown at the time. 29 4. Use the P-dial to select and confirm "Delete. " A dialog screen will ask you to confirm the Delete operation. Push Push 5. If you decide not to delete, use the P-dial to select and confirm [No] (or press the menu button), and you'll return to the file edit screen. [. . . ] It is effective to use software of a type that optimizes the free space. Drive Error. · An error occurred while accessing the drive. Use USB mode to connect the T3EX to your computer and execute the Check Drive command. If this error message appears even after you've executed Check Drive, format the drive. Drive Full. · There is insufficient remaining capacity on the drive. Delete unneeded projects/files. Failed to write System File. · The system update has failed. [. . . ]