User manual KORG T2EX BROCHURE

[. . . ] If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. (for USA and Canada) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Unplug this apparatus during lightning storms or when unused for long periods of time. Turning off the power switch does not completely isolate this product from the power line so remove the plug from the socket if not using it for extended periods of time. [. . . ] Use the dial to select "Information" and press the enter button to confirm. When you've finished viewing the details, press the exit button to return to the project/file edit screen. 9. Using marks within a project If you've made an extended recording, such as a live performance or a practice session, you can quickly navigate between songs or to a desired location by using markers to move while you listen to the program or by fast-forwarding or rewinding according to the counter time. However, the T2EX also lets you add marks to a project during recording or playback, and use the rewind and fast-forward buttons to rapidly move between these marks during playback. Even if the file (a WAV or DSDIFF file that can be recognized by the T2EX) was recorded and edited by another device, you can still use marks to move through the audio file. However, you will not be able to edit the marks. Adding a mark To add a mark, simply press the record button during recording or playback. You can set the Mark Mode (p. 30) so that the file will be divided at marked locations during recording. Markers are automatically added at the beginning of the project, and at locations at which you resume recording after you pause recording. If a divided file was created when the data size exceeded 1 GB during recording (p. 35), a mark will also be added automatically at the beginning of the divided location. When you save a project in which marks were added, the mark data will automatically be added to the audio file (WAV, DSDIFF) in the project. You can register marks in any position of the WAV, DEF or WSD project, but for the DSF project, only the 11. 6 ms (Fs=2. 8 MHz) or larger size mark can be registered by a unit of 5. 8 ms (Fs=5. 6 MHz). 21 Viewing the mark list Here's how to view the list showing the marks in a project in the order of their time location. When you use the dial to select "Delete All Mark" and press the enter button to confirm, a dialog screen will ask you to confirm the deletion. If you decide not to delete the marks, use the dial to select [No] and press the enter button to confirm (or press the exit button), and you'll return to the mark edit select (Mark Edit) screen. The screen will indicate "Working. . . " and the marks will be deleted. When deletion is finished, the display will indicate "Completed. " 4. Press the exit button (or the enter button) to return to the mark list (Mark List) screen. 5. Verify that all marks have been deleted, and press the exit button to return to the project/file edit screen. 24 Other functions Play mode The T2EX provides three play modes, as well as auto pause and repeat play settings. To select these modes, use "PLAY MODE" in the menu list (MENU) screen. The icon for the selected settings will appear in the home screen (p. 11). Single (play only one project/file): (folder) / (play list) In this mode, only the single project/file you select will play. (See "Selecting the project/file to play" on page 16) When the selected file has finished playing, playback will stop automatically. All (play all songs in folder / play the play list): ALL (folder) / ALL (play list) In this mode, the projects/files in the folder (or play list) that contains the selected project/file will be played in the order in which it appears in the library select screen list. [. . . ] Alternatively, delete unneeded files to increase the amount of free space, and then connect the MR2000S to your computer in USB mode and optimize the drive. It is effective to use software of a type that optimizes the free space. · An error occurred while accessing the drive. Use USB mode to connect the T2EX to your S/P DIF. · When receiving S/P DIF, a non-linear PCM audio signal was detected. Transmit a non-linear PCM audio S/P DIF signal. S/P DIF. [. . . ]