User manual KORG MR-2000S

[. . . ] Owner's Manual E IMPORTANT SAFETY INSTRUCTIONS · · · · · · Read these instructions. Mains powered apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Do not defeat the safety purpose of the polarized or groundingtype plug. [. . . ] Use the dial to select "Mark List" and press the enter button to confirm. When you've finished viewing the marks, press the exit button to return to the project/file edit screen. Using marks to move 1. The project/file edit screen will appear, with the name of the selected file in the top line. Regardless of the screen shown in the display, you can press the rewind or fast-forward button during playback to move to the time location of the previous or next mark. Press once Press once Current position (time) Press once Project Mark Press once Press once Mark Mark Mark Mark Order of times Alternatively, you can use the dial in the Mark List screen to select the desired destination mark, and then press the enter button to move there. When the move is completed, the display will return to the home screen. Editing marks You can edit the time locations of the marks shown on the mark list (Mark List) and delete the unwanted marks. You can only edit marks of a project that the MR-2000S is able to recognize. You can edit the marks even of a project whose Protect setting is on, but they will revert to their unedited state when you select a different project or turn off the power. In the mark list (Mark List) screen, use the dial to select the mark that you want to edit, and press the enter button to confirm. To return to the mark list (Mark List) screen, press the exit button. 22 2. Use the dial to select the item that you want to edit, and press the enter button to confirm. Changing the time locations of the marks You can register marks in any position of the WAV, DFF or WSD project, but for the DSF project, only the 11. 6 ms (Fs=2. 8 MHz) or larger size mark can be registered by a unit of 5. 8 ms (Fs=5. 6 MHz). When the time locations are changed, each location is automatically set to the nearest position within its specified region. When you use the dial to select the time, the time location of the mark will be changed, and press the enter button to confirm. The highlighted place will change each time you press the enter button. By pressing the enter button when the last place is highlighted, you can exit from changing the time location; to continue changing the time location, simply press the enter button again. To change the digits of the highlighted place, turn the dial to specify the value and press the enter button to confirm it. When you've finished adjusting these settings, press the exit button to return to the mark edit select screen. Deleting a mark (Delete Mark) 1. When you use the dial to select "Delete Mark" and press the enter button to confirm, a dialog screen will ask you to confirm the deletion. If you decide not to delete the mark, use the dial to select [No] and press the enter button to confirm (or press the exit button), and you'll return to the mark edit select (Mark Edit) screen. The screen will indicate "Working. . . " and the mark will be deleted. When deletion is finished, the screen will indicate "Completed. " 4. Press the exit button (or the enter button) to return to the mark list (Mark List) screen. 23 Deleting all marks (Delete All Mark) 1. When you use the dial to select "Delete All Mark" and press the enter button to confirm, a dialog screen will ask you to confirm the deletion. [. . . ] · A parity error occurred while receiving S/P DIF. Make sure that the external device is correctly con- computer and execute the Check Drive command. If this error message appears even after you've executed Check Drive, format the drive. · There is insufficient remaining capacity on the drive. Delete unneeded projects/files. nected to the MR-2000S. · Lock was lost when synchronized to S/P DIF. Make sure that the external device is correctly con- Failed to write System File. [. . . ]