User manual KORG MR-1

[. . . ] E2 Precautions Location Using the unit in the following locations can result in a malfunction. · In direct sunlight · Locations of extreme temperature or humidity · Excessively dusty or dirty locations · Locations of excessive vibration · Close to magnetic fields THE FCC REGULATION WARNING (for U. S. A. ) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] Press the menu button, and in the menu list (MENU) screen, use the P-dial to select and confirm "SYSTEM. " The system setting (SYSTEM) screen will appear. Use the P-dial to select "LED. " The selection icon will change from " " to " ", and the setting will be highlighted. Turn the P-dial to select "OFF. " To turn the LED back on again, perform the same operation to select "ON. " Push Push Push 4. The selection icon will change from " " to " ". 27 Setting the date and time If you set the MR-1's date and time, the recorded files will have the correct date and time stamp. Press the menu button, and in the menu list (MENU) screen, use the P-dial to select and confirm "SYSTEM. " The system setting (SYSTEM) screen will appear. Use the P-dial to select and confirm the date and time indication in the top line. The date and time setting (Clock) screen will appear. Push Push Push 3. Use the P-dial to select and confirm "Year. " The selection icon will change from " " to " ", and the year indication will be highlighted. Turn the P-dial to select the year, and press the P-dial (or the menu button) to confirm. The selection icon will change from " " to " ". Push Push 5. In the same way, use the P-dial to select and confirm the "Month, " "Day, " "Hour, " "Minute, " and "Sec. " 6. When you've finished making settings, press the menu button to return to the system setting (SYSTEM) screen. Alternatively, you can return by using the P-dial to select and confirm "<-Back" in the screen. If you leave the MR-1 sitting for two or three days and the rechargeable battery does not have enough power to turn on the MR-1, the date and time setting will be reset. If the date and time have been reset, a message will remind you to make the setting. The time will continue to advance while you're setting it. 28 Protecting a project Here's how to protect a project. If you edit the name or delete or edit the mark settings of a project that is protected, these settings will revert to their original state when you select another project or turn off the power. A protected project is indicated by a lock icon displayed in the project/file information field (the top line) of the level meter screen. You can't protect an audio file that was recorded by a device other than the MR-1 (such files will be located in the AUDIO folder). Press the menu button, and in the menu list (MENU) screen, use the P-dial to select and confirm "LIBRARY. " The library select (LIBRARY) screen will appear. Use the P-dial to select and confirm the project whose Protect setting you want to change. (See "Selecting and playing back a project/file, " p. 18) If you want to protect the currently selected project, simply press the P-dial twice to confirm. [. . . ] Please contact customer service. Memory Full. · You attempted to register more than 100 marks. Delete unneeded marks before registering other marks. Not supported file. · This file format is not supported. Check the file formats that are supported. Please enter name. · There is no project name (the name consists only of spaces). Please enter a valid project name (one or more alphabetical character, numeral, or symbol). Protected Project. · The operation cannot be executed because the project is protected. [. . . ]