User manual KORG MAXI-800-DV SCHEMATIC

[. . . ] You may also set the switch to DC to use the optional 9V power supply. The MAXI-800-DV-Series will not power up when set to USB unless the computer is on! Note: 2. MAXI-800-DV61P only: Connect a pair of audio cables from the rear panel L/R outputs to your stereo monitoring system, or plug stereo headphones to the HEADPHONES jack on the rear panel. Driver setup and editor installation Refer to pages 7-10 in the MAXI-800-DV-Series Owners Manual for driver installation for your particular computer. [. . . ] The MAXI-800-DV-Series Editor and M1Le software synthesizer can also be installed using similar steps. Working with the MAXI-800-DV-Series Controllers Open the M1Le software to begin having fun with your MAXI-800-DV-Series controller. If this is your first time running either software title, you will have to configure the appropriate Audio and MIDI device settings. For more on this, please reference page 2 of your MAXI-800-DVSeries Editor Manual and M1 Le Stand Alone Setup Guide. 1. 2. With either software selected, try moving the ClickPoint control- it should default to operating as your computer's mouse!> If it does not, select the MAXI-800-DV-Series editor, and click on the drop-down arrow above the ClickPoint graphic > Select MOUSE instead of CC as the choice, and click on TRANSMIT. (Note that when ClickPoint is set to CC, you can assign any CC number to the x (horizontal) and Y (vertical) axis) Select the M1Le software and click on the PROG button from the list of five buttons at the top of the screen > Try pressing the MAXI-800-DV-Series' switches SW1 and SW2 > They default to performing Program UP and DOWN functions > Note that the MAXI-800-DV-Series editor allows the UP and DOWN functions to be changed to send Continuous Controller (CC) messages- each switch can send a different CC#, with individual ON and OFF values. The MOD WHEEL can be assigned to any controller that would benefit from a smooth wide range of values. (MOD WHEEL defaults to transmitting CC#1) Plug in an optional momentary pedal, and it will default to the DAMPER function (CC#64) > DAMPER can be re-assigned to any controller number, function as a MOMENTARY or TOGGLE switch, or transmit separate ON and OFF values. Working with the MAXI-800-DV61P The MAXI-800-DV61P is unique ­ a USB MIDI controller that also can play great internal keyboard sounds. This makes it perfect for going from your computer home studio to gigs and rehearsals. Plus, when used with your computer it provides these essential sounds without making any "demands" on your CPU. 1. 2. Press the Bank key to select one of the three banks of eight sounds > Press one of the eight program keys to select a sound. [. . . ] 2. Press the Bank key to select one of the three banks of eight sounds > Press one of the eight program keys to select a sound. Press the REVERB or CHORUS keys to add effects to the internal sounds. [. . . ]