User manual KORG KROSSFOUR EASY START

[. . . ] Connect the main out (composite or S-Video) to your main video monitor. Connect monitor out (composite) located on the front panel, to the video monitor you will use for cueing video sources. [. . . ] Curve 1 ­ Allows for smooth transitions between channels, and begins blending sources from the instant you move the cross-fader. Curve 2 ­ Mix fades to black at the center position of the cross-fader, and then fades the second channel in. Curve 3 ­ Allows for smooth transition between channels 1 and 2, but doesn't begin the blend until the cross-fader has reached the center position. Curve 4 ­ This curve can be used for abrupt switching and transform-type effects between the channels without fade-ins or fade-outs. Fading to Black or White The krossfour allows you to fade a source to a black or white screen. . . Move the mode switch located on the front panel to position 1, labeled B. Select your video source for channel 2, and move the cross-fader to the far-right position. For channel 1, press any of the input select buttons twice so that the red light blinks. Move the cross-fader to the left, and the video source on channel 2 will fade to a black screen. Fade to White: 1. Move the mode switch located on the front panel to position 2, labeled W. Select your video source for channel 2, and move the cross-fader to the far-right position. For channel 1, press any of the input select buttons twice so that the red light blinks. Move the cross-fader to the left, and the video source on channel 2 will fade to a white screen. Using the Chroma Key Function The Chroma key function allows the krossfour to ignore blue in a video source, and allows the second channel to pass through in the blue areas. . . 1. [. . . ] Select an empty input on channel A resulting in a blue background Select video source on channel B Set mode to Luma-Key (L-K) Move Fader all the way to channel B Rotate fine tune knob to key out light and dark info on channel B Blue background on channel A is revealed Variation 1 on this effect: a. Press input button twice on channel A so that it begins blinking You should now see a white background Press HOLD on channel A Set the mode switch to Luma-Key (L-K) Move Fader all the way to channel B Rotate the fine tune knob to key out black, white, or grays on channel B White background on channel A is revealed Variation 2 on this effect: a. [. . . ]