User manual KORG KPE-1 EASY START

[. . . ] If the signal is coming directly out of the KPE-1 into an external mixer, powered monitor pair or headphones, then set the CONNECTION to DIRECT. If the KPE-1 is connected to a Send/Return of a DJ mixer or Line Mixer, then set the CONNECTION to FX LOOP. [. . . ] Press the REC/STOP key to start sampling, press the REC/STOP key to stop. If the REC/STOP key is not pressed before the 6-second time limit, sampling will stop automatically. To play back an audio sample, either press the SAMPLE 1 or SAMPLE 2 key or select a program in the SAMPLE PLAY group (90-99) and touch the Pad. To play back a video sample, select a program from the SAMPLE PLAY group (94-99) and touch the Pad or select any other program, press and hold the REC/STOP key and touch the Pad. To lock motion video sample playback, press and hold the REC/STOP key and then press the HOLD key. To cancel, press the HOLD key again. Using Pad Motion and Mute/Freeze 1. To record a Pad Motion, push the PAD MOTION Switch up and then touch the Pad. It will record approximately six seconds of Pad movement including tapping the Pad. To play back a Pad Motion, push the PAD MOTION switch up and it will loop play the previously recorded Pad Motion. If you touch the Pad during playback, Pad Motion recording will start again. Pad Motion is not stored in memory and once you change the program or turn the KPE-1 off, Pad Motion will be erased. To Mute audio input or Freeze the video input, pull the MUTE/FREEZE switch down. Storing and Playing a Video Still Image 1. [. . . ] To cancel the display, either press the selected 1-8 PROGRAM MEMORY key again or turn the PROGRAM/BPM Key. To store the Pattern Display setting press and hold the REC/STOP key for a few seconds while in the Pattern Display mode. [. . . ]