User manual KORG KONTROL49

[. . . ] When you press the scene key, the first 12 Pads will light up for you to make your selection. MESSAGE ­ Hold this key and press one of the pads to send messages to your software synths or DAWs such as Start, Stop, Tap Tempo, All Notes Off, Bank/Program Changes etc. [. . . ] Click on the "Receive" button in the lower left of the scene pad display window to send the preloaded scenes currently stored in the KONTROL49 to the Editor/Librarian software. When finished, a dialog box will appear and indicate the scene set was received successfully. To view and/or edit the parameters assigned to the controllers, click on the "parameter viewer" popup in the upper right of the pad display window to access the details of the controller assignments. To load a scene or scene set into the KONTROL49 from the computer, first locate it using the folder tree on the left side of the window. In Mac OSX, the file path is Macintosh HD > Applications > KORG > KONTROL49 > Scene Data or Scene Set. In Windows XP, the file path is My Computer > C:drive > Programs > KORG > KONTROL49 > Scene Data or Scene Set. Click on and hold the desired scene or scene set, then drag and drop it to the desired pad/scene location. When loading a scene set, it makes no difference which pad the set is dragged on to. When loading a scene set, select "All Scene" then click "OK" to load the set. To transfer a new set to the KONTROL49, click on the "Transmit" button in the lower part of the pad display window. A warning will appear "This operation will overwrite data on the KONTROL49. Custom scene sets can be created by dragging individual scenes from the folder tree to the pad locations you would them to reside at. [. . . ] Hold the MESSAGE key and press Pad #5, labeled STOP ­ the sequence will stop. Hold the MESSAGE key and press Pad #7, labeled CONTINUE ­ the sequence will continue from where you stopped it. [. . . ]