User manual KORG KAOSS PAD ENTRANCER

[. . . ] Using the unit in the following locations can result in a malfunction. Do not connect it to an AC outlet of voltage other than that for which your unit is intended. Keeping foreign matter out of your equipment Never set any container with liquid in it near this equipment. If liquid gets into the equipment, it could cause a breakdown, fire, or electrical shock. [. . . ] When you press the [REC/STOP] key, the [REC/STOP] key will light and recording will begin. Recording will end when you press the key again or when the memory capacity has been reached. If you select an effect clip pattern (40­59) in pattern display mode, you will be able to record a pattern. Turn on the [SAMPLE 1] or [SAMPLE 2] key to record the still image that you sampled. When you touch the touch-pad, the video clip will play back according to the position of your finger on the touch-pad. With the [SAMPLE 1] and [SAMPLE 2] keys turned off, hold down the [REC/STOP] key and touch the touch-pad; the sampled video clip will playback at normal speed. If you hold down the [REC/STOP] key and press the [HOLD] key, the [REC/STOP] key will be held, allowing you to play back the video clip simply by touching the touch-pad. When you hold down the [REC/STOP] key and press the [HOLD] key, playback will be held. When you press the [REC/STOP] key once again, the hold will be cancelled. Pattern display will be cancelled if you play back a motion video sample while a pattern is displayed. If you have recorded a phrase from the input into the [SAMPLE 1] and [SAMPLE 2] keys, you can select a program from the "SAMPLE/PLAY" group (90­99) and use the touch-pad to control the playback speed or reverse playback. If you have selected a program from other than the "SAMPLE/PLAY" group, pressing the [SAMPLE 1] or [SAMPLE 2] key will play back the phrase that was recorded on each key. You can record approximately six seconds of monaural sound in each key. The [REC/STOP] key LED will blink, and you will be in record-ready mode. Press either the [SAMPLE 1] or [SAMPLE 2] key that you want to use for recording. Press the [REC/STOP] key; the [REC/STOP] key LED will light and recording will begin. recording will end automatically if you record up to the maximum recording time. If you select a program not in the "SAMPLE/ PLAY" group, you can operate the touch-pad while you record; the sound processed by the effect will be recorded. Auto-rec (AUTO REC) You can make recording start automatically when audio is input to the [INPUT] audio jacks. In step 2 of recording, hold down the [SAMPLE 1] or [SAMPLE 2] key you want to use, and press the [REC/STOP] key; the [REC/STOP] key and [SAMPLE 1] [SAMPLE 2] key LEDs will blink simultaneously, and you will be in record-ready mode. If the lever is set to "COMBI, " and you have selected a program from the "SAMPLE/PLAY" group as the video effect, you can record the video simultaneously with the audio. When you touch the touch-pad, playback will occur according to the position you touch. [. . . ] 1-4 SYSTEM EXCLUSIVE MESSAGES FUNCTION CODE LIST (TRANSMIT) +-------------+-----------------------------------+---+---+ | Function ID | |R|E| | [Hex] | ||| +-------------+-----------------------------------+---+---+ | 49 | CURRENT MAP DATA DUMP |o| | | 4D | MAP DATA DUMP |o| | | 51 | GLOBAL DATA DUMP |o| | | 50 | ALL DATA DUMP |o| | | 26 | DATA FORMAT ERROR | |o| | 23 | DATA LOAD COMPLETED | |o| | 24 | DATA LOAD ERROR | |o| | 21 | WRITE COMPLETED | |o| | 22 | WRITE ERROR | |o| +-------------+-----------------------------------+---+---+ Transmitted when R : Request message is received E : Exclusive message is received (1) CURRENT MAP DATA DUMP REQUEST R +----------------+--------------------------------------------------+ | Byte | Description | +----------------+--------------------------------------------------+ | F0, 42, 3c, 6x | EXCLUSIVE HEADER KPE1(x:=F) or KP2(x:=7) | | 0001 1001 (19) | CURRENT MAP DATA DUMP REQUEST 19H | | 1111 0111 (F7) | EOX | +----------------+--------------------------------------------------+ When this message is received, the CURRENT MAP DATA DUMP (Function:49h) message will be transmitted by the same ID (KPE1:6Fh or KP2:67h). (2) MAP DATA DUMP REQUEST R +----------------+--------------------------------------------------+ | Byte | Description | +----------------+--------------------------------------------------+ | F0, 42, 3c, 6x | EXCLUSIVE HEADER KPE1(x:=F) or KP2(x:=7) | | 0001 1101 (1D) | MAP DATA DUMP REQUEST 1DH | | 1111 0111 (F7) | EOX | +----------------+--------------------------------------------------+ When this message is received, the MAP DATA DUMP(Function:4Dh) message will be transmitted by the same ID(KPE1:6Fh or KP2:67h). (3) GLOBAL DATA DUMP REQUEST R +----------------+--------------------------------------------------+ | Byte | Description | +----------------+--------------------------------------------------+ | F0, 42, 3c, 6x | EXCLUSIVE HEADER KPE1(x:=F) or KP2(x:=7) | | 0000 1111 (0E) | GLOBAL DATA DUMP REQUEST 0EH | | 1111 0111 (F7) | EOX | +----------------+--------------------------------------------------+ When this message is received, the GLOBAL DATA DUMP(Function:51h) message will be transmitted by the same ID(KPE1:6Fh or KP2:67h). (4) ALL DATA DUMP REQUEST R +----------------+--------------------------------------------------+ | Byte | Description | +----------------+--------------------------------------------------+ | F0, 42, 3c, 6x | EXCLUSIVE HEADER KPE1(x:=F) or KP2(x:=7) | | 0000 1111 (0F) | ALL DATA DUMP REQUEST 0FH | | 1111 0111 (F7) | EOX | +----------------+--------------------------------------------------+ When this message is received, the ALL DATA DUMP(Function:50h) message will be transmitted by the same ID(KPE1:6Fh or KP2:67h). [. . . ]