User manual KORG K-SERIES EDITOR

[. . . ] 3 KNOB1/KNOB2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Switches [SW1] and [SW2] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The K-Series controller keyboard will transmit data to the K-Series Editor. When transmission is completed, the various controller parameters will appear in the window. Specify a name and the location in which to save the file, and click the [Save] button. An extension of ". ksd" will be added to the file name. Loading scene data into the K-Series Here's how to load previously-saved scene data from your computer into the K-Series controller. Don't operate the K-Series controller keyboard while data is being transmitted or received. If an error message appears while data is being transmitted or received, check the MIDI driver and the connections. Select a file with an extension of ". ksd" and click the [Open] button. The scene data file will be loaded, and the parameter settings for the various controllers will appear in the window. The scene data will be loaded into the K-Series controller. KORG Inc. K-Series Editor Owner's Manual Page 3 Parameter settings Editing the settings Use the buttons and popup menus etc. If you enter a "-" (minus sign) in a control change number field, that parameter will be set to No Assign. Parameter Assignments ClickPoint Here you can edit the parameters assigned to the ClickPoint. MODE Specifies the operating mode of the ClickPoint. CC Lets you assign control changes to the ClickPoint's X and Y axes. X:CC#, Y:CC# These fields specify the control change numbers transmitted when you operate the ClickPoint. No Assign [-] Control Change Number [0. . . 127] KORG Inc. K-Series Editor Owner's Manual Page 4 KNOB1/KNOB2 Here you can edit the parameter assigned to KNOB1 and KNOB2. CC# These fields specify the control change numbers transmitted when you operate KNOB1/KNOB2. [. . . ] TOGGLE Each time you press the pedal, the On Value and Off Value will be transmitted alternately. Global parameters Here you can edit the global parameters. MIDI CH Specifies the channel on which the K-Series will transmit MIDI messages. MIDI Channel [1. . . 16] TRANSPOSE Specifies the key transposition in semitones. [. . . ]