User manual KORG GA40

[. . . ] Please also retain your receipt as proof of purchase otherwise your product may be disqualified from the manufacturer’s or distributor’s warranty. 2 Owner’s Manual Thank you for purchasing the Korg GA-40 guitar/bass tuner. 3 4015-2 Yanokuchi , Inagi-city , Tokyo 206-0812 Japan Introduction Installing the batteries 4 2005 KORG INC. [. . . ] The GA-40 will be in Sound Out mode, and the speaker will play a reference tone. The reference tone is one octave higher than the actual pitch of your guitar, and two octaves higher than the actual pitch of your bass. Interference with other electrical devices Radios and televisions placed nearby may experience reception interference. Handling To avoid breakage, do not apply excessive force to the switches or controls. do not use liquid cleaners such as benzene or thinner , or cleaning compounds or flammable polishes. Using the stand By opening the stand located on the back, you can position the GA-40 at a convenient angle. Flat tunings In either Meter mode or Sound Out mode, you can tune to a pitch that is between one semitone ( ) and five semitones ( ) below the selected note name. 1 Press the [FLAT] button several times to specify how far you want to lower the pitch relative to the note name. 2 Tune your instrument in the usual way using Meter mode or Sound Out mode. Keep this manual After reading this manual, please keep it for later reference. Keeping foreign matter out of your equipment Never set any container with liquid in it near this equipment. If liquid gets into the equipment, it could cause a breakdown, fire, or electrical shock. ) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. [. . . ] If nothing is connected to the INPUT jack, the internal mic will be automatically used. In this case, sound entering the internal mic could cause feedback, possibly damaging your amp. CE mark for European Harmonized Standards CE mark which is attached to our company’s products of AC mains operated apparatus until December 31, 1996 means it conforms to EMC Directive (89/336/EEC) and CE mark Directive (93/68/EEC). [. . . ]