User manual KORG ESX1SD

[. . . ] SX-SD Please read this booklet as well as the ELECTRIBE· SX Owner’s Manual for information on using the new ELECTRIBE· sX-SD. This booklet describes features that are new or modified relative to those from the ELECTRIBE· sX. [. . . ] Never remove the card or turn off the power to the unit while the SD card is being accessed (i. * In the part describing SmartMedia™ on pages starting from page 85 in the Owner’s Manual, please replace “SmartMedia™” instances with “SD card. € For cautions and information regarding the SD card write-protect function, please refer to the “About SD card write-protection” section in this booklet. Using an SD card You can use an SD card to save or load ELECTRIBE∙SX-SD internal data. You can also load samples (WAVE and AIFF files) created on a personal computer into the ELECTRIBE∙SX-SD. The ELECTRIBE∙SX-SD supports SD cards of up to 2GB capacity and SDHC cards of up to 32GB capacity. The ELECTRIBE∙SX-SD may take time to recognize or write files on large capacity cards. new patterns and samples • The Pattern name list on page 100 has been changed. About SD card write-protection To prevent data saved on an SD card from being erased or overwritten accidentally, set the write-protect switch to the “protect” position. If the card is write-protected, you will not be able to write to or erase data from the card, or format the card. [. . . ] Since the correct method of disposal will depend on the applicable laws and regulations in your locality, please contact your local administrative body for details. If the battery contains heavy metals in excess of the regulated amount, a chemical symbol is displayed below the “crossed-out wheeled bin” symbol on the battery or battery package. [. . . ]