User manual KORG D1200MKII

[. . . ] EasyStart D1200mkII Main Features · · · · · · No audio compression ­ 16/24-bit recording available 16 channel, 4 bus digital mixer 12 track recorder, with 96 virtual tracks 4-track simultaneous recording Hi, Lo and adjustable Mid frequency EQ for every channel New Modeling mode provides accurate Guitar and Bass effect and amp simulations, plus Mic models ­ all instant top panel accessible and programmable · Up to 11 simultaneous effects per song: 8 Inserts, 2 Masters and a Final effect. · 100 Scenes, 100 Mark points, 4 Locate points per song · Pro-level editing of song and track data including copy, insert, normalize, exp/compression, 99 levels of UNDO and much more!· Built-in auto chromatic tuner, metronome and hundreds of PCM rhythm patterns · Internal 40 GB hard disk w/ 2GB USB partition · USB computer connection for backup and/or WAV file transfer · Internal CDRW 16X CD burner for backup and mastering EasyStart CONTENTS A quick overview of D1200mkII modes, functions and operations Navigating the D1200mkII Display Getting started: Listening to the demo songs Guitarists: Try the new Modeling Mode with one of the demo songs Creating a new song and recording with any instrument or microphone Assigning inputs and recording Listening to the recorded tracks Working with EQ on playback Using the Insert, Master and Final Effects Working with Scenes Selecting Virtual tracks and Editing tracks Creating a Mixdown and burning and audio CD on the D1200mkII Important D1200mkII Owner's Manual references 2-3 4 4 4 5 5 5 6 6 7 7 7-8 8 D1200mkII EasyStart A quick overview of D1200mkII modes, functions and operations MODELING - This mode allows you to quickly select and edit REMS guitar, bass, and mic modeling effects for recording. By pressing the [MODELING] key, using the CURSOR keys to select a Model type (Guitar, Bass or Mic), then pressing [ENTER], Tracks 1& 2 are automatically set to record status. [. . . ] UNDO -This function allows you to go back and UNDO/REDO any previous recording or editing procedure in the current song. The D1200mkII lets you set the desired number of undo levels: 99, 8 or 1 level. Note: A setting of "8" or "1" UNDO levels allows you to conserve hard disk space. TUNER - Here you can tune an instrument connected to the INPUT 1/GUITAR jack, with the built-in auto-chromatic tuner. RHYTHM - Here you can set song tempo, create a tempo map, record your own tempo track, set time signature and select rhythm patterns from any of the 96 metronome and 215 PCM-based drum patterns. To access and listen to the patterns, press the RHYTHM key and use the CURSOR keys to select "Rhythm:Off", and then press [ENTER]. Use the DIAL to scroll through different patterns or view the pattern list, accessed by selecting the " " button next to Rhythm and pressing [ENTER]. 3 D1200mkII EasyStart Navigating the D1200mkII Display · · To select the display "tabs" in each mode, use the [<-TAB->] keys or repeatedly press a mode key: [INPUT/OUTPUT/SOLO], [INSERT EFFECT] etc. The [<-TAB->] keys also function as [NO/CANCEL] and [YES/OK] keys. To move to different locations in the display, use any of the four CURSOR keys. To confirm a highlighted selection in the display, press the [ENTER] key. To change a highlighted value, rotate the DIAL. The Transport keys [ ] = RECORD [ ] = PLAY [ ] = STOP [ ] = REWIND [ ] = FAST FORWARD Getting Started: Listening to the demo songs 1. 2. After connecting the AC power cable and external powered monitors to the rear panel MONITOR L/R outputs, press the [ON] key (red) on the top panel. (You can also connect headphones to the front panel PHONE jack) Make sure that the "SelSong" tab is selected in the display. If not, use the [<-TAB->] keys to move to this tab Use the DIAL to select song "001" or "002", and press the [ ] PLAY key to begin song playback When finished listening, press the [ ] STOP key. Guitarists: Try out the new Modeling Mode with one of the demo songs 1. Select Demo Song "002 Play The Blues". Using the [<-TAB->] keys, select the "EditSong" tab and use the DIAL to select "ProtectSong". CURSOR down to "Exec. " and press [ENTER] to turn protect OFF( the lock" icon will disappear). ! This demo song has lead guitar recorded on tracks 1 and 2, and you'll be recording on these same tracks, however by selecting Virtual tracks you won't lose the original recorded data. 2. Press the [TRACK] key and select the "Vtr1-6" tab using the [<-TAB->] keys Highlight track 1a and use the DIAL to select 1b (an open virtual track) CURSOR right and in the same way, set track 2a to 2b. Press the [MODELING] key, and use the CURSOR to highlight Guitar, then press [ENTER]. When you do this, the Input routing and Effect assignments are automatically set, as well as the Record status for both tracks!Now use the three realtime knobs below the display to select DRIVE (Knob1 / type of distortion), TONE (Knob 2 / preamp tone), and CABINET (Knob3) settings. Press the [TRACK SELECT] keys for each of the tracks that you assigned in the previous step, so that the green LED changes to orange. Press the [METER/ TRACK VIEW] key, then select the " " popup button in the upper left of the display using the CURSOR and [ENTER] keys Select "PreFdr" from the list and then press the [YES/OK] key Now you can play your audio sources and adjust the levels so that they do not clip ("CLP" line in display). To enable recording on those tracks, press the [TRACK SELECT] keys one more time to change the LED from orange to red, and press [ ] to put the D1200mkII in record standby mode. [. . . ] For more information on editing tracks, refer to the D1200mkII Owner's Manual pages 57-63 & 108-113. 3. 4. 5. Creating a mixdown and burning an audio CD on the D1200mkII For the following procedure, let's use one of the D1200mkII Demo Songs. . . Copy "Play the Blues" to a new song location: 1. Press [SONG]. On the "SelSong" tab select DemoSong 002: Play The Blues. Select Copy Song as the "EditType" by using the CURSOR keys and the DIAL CURSOR down and set the copy to location to "003" with the DIAL, and then select Exec. Select "ProtectSong" as the "EditType" with the DIAL off. (The "lock" icon will disappear) CURSOR down to Exec and press [ENTER] to turn protection 2. 7 D1200mkII EasyStart Bounce and Burn! 1. [. . . ]