User manual KORG AX1G

[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Unauthorized changes or modification to this system can void the user's authority to operate this equipment. Do not connect it to an AC outlet of voltage other than that for which your unit is intended. [. . . ] The AX1G can also resample; allowing you to sample external audio sources through the internal effects, or capture the entire output of the AX1G as a new sample. Loop samples can be up to four measures (16 beats) long, at the current BPM when you begin recording. (for example, at a tempo of 140, 16 beats would be approximately 7 seconds). If the tempo value is 73 or lower, the maximum of beats that can be sampled is 8. If the tempo value is 39 or lower, the maximum of beats that can be sampled is 4. When a loop sample is created, it will begin playing as soon as it is done being recorded (the corresponding SAMPLE BANK button will be lit orange. The PROGRAM MEMORY buttons allow you to save and instantly recall your eight favorite AX1G programs and settings. When you are ready to record, press one of the blinking SAMPLE BANK buttons A, B, C, or D. If you want to record a one-shot sample, press the same SAMPLE BANK button before reaching the specified BEAT. It will be easier to record a one-shot sample if you specify a longer setting such as "16. Touch the pad to adjust the playback level of the sample for that bank. Do not allow dirt or foreign matter to adhere to the contacts of an SD card. If the contacts should become soiled, gently wipe them off using a dry cloth. When you are not using an SD card, keep it in the protective case that was included with the card to prevent it from being damaged by static electricity. Do not leave an SD card where it is accessible by infants or children who might place it in their mouth and swallow it. Carefully read and observe the owner's manual included with your SD card. About the write protect setting of an SD card SD cards have a write protect switch that prevents the data from being overwritten Using SD memory cards When formatting is complete, the display will indicate "End. " Press the TAP/RANGE button (lit orange) to return select another parameter, press the SHIFT button to return to normal operation. Press the TAP/RANGE button (lit orange) to return select another parameter, press the SHIFT button to return to normal operation. NOTE Don't use your computer or digital camera to format (initialize) a card you plan to use with the AX1G. If the card was formatted on a different device, it may not work correctly with the AX1G. You can save sample data, program memory, global settings, or all settings to the card. [. . . ] All copyrights to the software associated with this product is the property of Korg Corporation. Your installation of the software will be taken as indicating your acceptance of this license agreement. NOTE You must have Administrator user privileges in order to install or uninstall software in Windows XP. NOTE Before you connect the AX1G to your computer via USB, you must use the AX1G application installer to install KORG USB-MIDI Driver Tools. [. . . ]