User manual KONICA NT RIP GETTING STARTED GUIDE REV 12
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KONICA NT RIP. We hope that this KONICA NT RIP user guide will be useful to you.
Manual abstract: user guide KONICA NT RIPGETTING STARTED GUIDE REV 12
Detailed instructions for use are in the User's Guide.
[. . . ] Konica NT RIP Getting Started Guide
Additional documentation can be found in the Documentation folder on your Konica RIP CD
AG12333P3 Rev. 12
Konica NT RIP Getting Started
Konica NT RIP Getting Started Guide
This guide reflects the Konica NT RIP Getting Started Guide as of September 2004. © copyright Konica Incorporated 2004
Proprietary Notice
The information contained within this guide is the property of ECRM. No transmission, reproduction, transcription, storage in a retrieval system, translation into any language or other use is permitted in whole or in part in any form without first obtaining written permission of ECRM. [. . . ] One Style Name can be used for more than one page setup.
Step 1 Select the icon for Separations, Screening and Color.
·The Separation Manager window displays.
Step 2
Select the name of your recorder in the Device field and highlight the style name you wish to use. 12
. . . . .
Configuring the RIP
Step 3 Step 4 Click the Select button. if you wish to create a new separations page.
·The New Style dialog box displays
Step 5 Step 6 Step 7
Enter a unique Style Name: Select a Color Space: Output Format: is chosen automatically, depending on your Color Space: selection. Depending on Color Space: chosen, either a Monochrome or a CMYK Edit Style dialog box appears.
Step 8
22
Konica NT RIP Getting Started
AG12333P3 Rev. 12
SEPARATIONS MANAGER
Step 9
If you choose monochrome or RGB as your color space, this edit style dialog box displays. Use Level 1 spot colors is grayed out and not available for RGB.
AG12333P3 Rev. 12
Konica NT RIP Getting Started
. . . . .
23
Configuring the RIP
Step 10 If you choose CMYK as your color space, this edit style dialog box of displays. Use Level 1 spot colors is available for CMYK.
Step 11
Highlight any color and edit Print, Angle, or Ink fields, if needed. Select Use level one spot colors if applicable (grayed out for monochrome and RGB color space). Select Override angles in job, Reject preseparated jobs, and Recombine preseparated jobs, if applicable. Select Use Harlequin Precision Screening if desired, and make the appropriate settings. Select Use extra gray levels if desired and fill in Limit number of gray levels to:
Step 12 Step 13 Step 14
Step 15
Step 16 Step 17 Step 18
Step 19
24
Konica NT RIP Getting Started
AG12333P3 Rev. 12
CONFIGURE DEVICE
Step 20
Select Rotate screens according to page rotation.
Step 21
Click OK.
·The Separations Manager window displays.
Step 22 Click OK.
·The New Page Setup window displays.
Step 23 Click Configure device. . . if not grayed out.
Note:
The Device Configuration dialog box for your recorder displays. The Configure Device Section explains each type.
C o n figure D evice There are five possible Configure device windows that you will see depending on the type of recorder that you selected in the Output device: entry: one for MAKO HT recorders, one for Cut-to-size recorders, one for non Cut-to-size recorders, one for EV-jetsetter 9200 recorders, and one for DesertCat devices. Some recorders do not require a Configure device window, in which case the Configure device button is grayed out. Follow the directions below for your recorder as identified by the illustration of the window.
AG12333P3 Rev. 12
Konica NT RIP Getting Started
. . . . .
25
Configuring the RIP
MAKO HT RECORDERS
Figure 1. Device Configuration Window (Mako HT)
Step 1 First, set the Image Spacing units to your desired unit of measure, e. g. Set the image spacing value to the distance between images that you want. Device Configuration Window (Non Cut-to-size)
Step 1 Step 2 First, set Distance Units to your desired unit of measure. Set Punches to: Both head and tail punches or Head punch only or No punches. [. . . ] 12
Konica NT RIP Getting Started
. . . . .
39
Calibration
·The Edit uncalibrated target for Preview dialog box displays.
Step 9
Click under Warning Criteria: on each parameter box to import the associated data from your current Page Setup. Select from among the Channel: options: if Color Space = Monochrome, then Channel = Gray. In the box below each dot percentage category, enter the densitometer reading you read from the uncalibrated target. In the main menu, pull down from ECRM RIP to Page Setup Manager. . . ; Page Setup Manager appears. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KONICA NT RIP
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KONICA NT RIP will begin.