User manual KONICA K28 PRE-INSTALLATION INFORMATION
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual KONICA K28. We hope that this KONICA K28 user guide will be useful to you.
Manual abstract: user guide KONICA K28PRE-INSTALLATION INFORMATION
Detailed instructions for use are in the User's Guide.
[. . . ] Graphic Imaging International
71 Charles St. , Glen Cove, NY 11542 PHONE :(516) 674-2500 FAX :(516) 674-2727
Konica K21/28/34 Pre-Installation Information
To avoid waste of your production time as well as the time it will take for the engineer to install the processor, please make sure that the requirements listed below are fulfilled before you schedule the installation.
ENVIRONMENTAL REQUIREMENTS
Provide a heating and ventilating system capable of maintaining room temperature between 10° and 25°C (50°- 77°F) and relative humidity (RH) between 50% and 60%. [. . . ] The water hose is included with the installation kit.
-
DRAIN OUTLETS
The drain outlet should have a funnel shape to allow for proper drain line routing. The recommended distance from the processor to the drain is 0. 5 m max. Copper or brass should not be used in the drainage system as fixer containing silver might attack it. If silver recovery is desired, the 25 mm (1") drain hose from the fixer tank can be Connected to a silver recovery unit.
CLEANING FACILITIES
For cleaning purposes it would be convenient to have easy access to a water tap and a suitable sink, where racks, rollers and guides can be washed and chemicals mixed.
POWER CONNECTIONS
If not already there, a main power outlet should be installed in the room, where the processor will be situated. The requirements are specified in the following pages.
3/2001 K21/28/34 pre-installation info
Page - 1 -
Technical Specification
3/2001 K21/28/34 pre-installation info
Page - 2 -
3/2001 K21/28/34 pre-installation info
Page - 3 -
3/2001 K21/28/34 pre-installation info
Page - 4 -
3/2001 K21/28/34 pre-installation info
Page - 5 -
(198V-253V)
Please Note: 1. The processor is supplied with a GFCI relay (Ground Fault Circuit Interrupter) with the power cord, it is for Single Phase Only. [. . . ] (If outlet is not available, the customer is to supply a plug to mate with the outlet used).
Air Conditioning requirment
17, 000 Btu (Maximum)
3/2001 K21/28/34 pre-installation info
Page - 6 -
3/2001 K21/28/34 pre-installation info
Page - 7 -
3/2001 K21/28/34 pre-installation info
Page - 8 - [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE KONICA K28
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual KONICA K28 will begin.