User manual KONICA 7165

[. . . ] MANUEL UTILISATEUR M 7155/7165 Basic Advanced Contents Contents Features of the Konica 7155/7165 Basic Safety Information 1 Section 1: Safety Information Caution Labels and Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Requirements for Safe Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5 Power Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5 Environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] In this case, other network functions provided to the copier will be unavailable. (2) Connect each of the two copiers to the hub in a network using straightthrough cables. Use the straight-through or crossover cables of Category 5 or of the later standard to connect the machines. The combination of the two copiers can be either the same models (two 7155 copiers or two 7165 copiers) or different models (7155 and 7165). Two copiers should have the same optional configuration except for the option tray (LT-401/LT-411). The copier with the TANDEM key highlighted on the Output Mode popup menu will be the primary (master) copier, turning both copiers into the tandem mode. Select the copying conditions, scan originals, and press [START] on the primary copier to operate both copiers in tandem to complete a job. Print quantity must be set for [2] or more copies to activate the tandem mode. When the print quantity entered is an odd number, the primary copier will copy and output one sheet/set more than the secondary copier to accommodate the job. Auto low power/Auto shut-off may function while tandem mode is selected. · If the tandem mode is selected while the secondary copier is in Auto low power mode, the power saving mode will be released automatically. · The tandem mode will not be selected when the secondary copier is turned off by Auto shut-off. · If Auto low power is activated on the secondary copier during the tandem job setting, the power saving mode will be released automatically when printing job starts. · If Auto shut-off is activated on the secondary copier during the tandem job setting, the tandem mode will be released automatically. · If Auto low power/Auto shut-off is activated on the primary copier, the tandem mode will be released automatically. Initially, the tandem mode will be released automatically if Auto reset is activated on the primary copier. Key operator can set the primary copier to select the tandem mode as initial setting. 7-23 Weekly Timer Rotation Vertical/Horizontal Zoom Fold / Stitch&Fold Punch Three-Fold Cover Sheet Feeding Using Finisher Manually Tandem Mode Advanced Information 7 7155e07v1. fm 24 Using Two Copiers in Tandem (continued) The 7155/7165 is provided with an Allocation recovery mode, which functions when trouble occurs in either the primary or secondary copier to allow the trouble-free copier to complete the job. When the two copiers in tandem mode have the same EKC password registered, copying will be available by entering the EKC password in the primary copier only. Interrupt copying is available only on the copier with [INTERRUPT] pressed. If the primary copier is installed with HDD, the image data stored in HDD can be output in tandem mode copying. Corresponding tray sizes on the primary and secondary copiers should be the same when using multiple trays for a single job. [. . . ] 4 If no further changes are required, touch RETURN to restore the Basic Screen to perform copying operations. 13-51 13 Key Operator Mode 7155e133v1. fm 52 [19] Scan Transmission Setting Use this function to change or delete the address registered for transmitting the image data scanned on the machine. · E-mail · HDD (box No. ) · FTP (FTP server address) NOTE: The [19] Scan Transmission Setting key will function only when IP511 Printer Controller is installed on the machine. Key Operator Mode Screen Scan Transmission Setting Screen Change E-Mail Address Screen Change Box No. Screen Change FTP Address Screen Procedure 1 Touch [19] Scan transmission setting on the Key Operator Mode Screen to display the Scan Transmission Setting Screen. [. . . ]