User manual KOMPERNASS SILVERCREST KH 2309 MICRO STEREO SYSTEM

[. . . ] Intended Usage Items supplied Technical Data Safety instructions Positioning the device The operating components Inserting the batteries Handling of batteries Becoming acquainted with the remote control Connecting the components Switching the device on and off Selecting the programme source Setting the sound volume levels Using headphones The Bass Boost function Operating the radio Operating the CD player MP3 functions AUX operation Cleaning and care Troubleshooting Disposal CE Conformity Importer Important Warranty Notices Read the operating instructions carefully before initial use and keep them for future reference. Pass this booklet on to whoever might acquire the device at a future date. The Micro system is not intended for use in commercial or industrial environments. If you do not intend to use the device for an extended period, remove the batteries. [. . . ] Listening to music with headphones over a long period of time and with full volume can result in loss of hearingf!> Connect the speaker wires of the left speaker to the left speaker terminals: · If you want to emphasize the deep frequencies during playback press the BASS BOOST ON/OFF button e. This device receives radio stations on the frequency bands, Ultra short wave (USW or engl. The technical details of the device allow for an adjustable frequency range outside of the receivable MW (AM) 526, 51606, 5 kHz, and/or FM (USW) 87, 5-108, 0 MHz frequency ranges. insomecountries , differentnationalregulationsmay apply to the assigned radio frequency ranges. Please note that information received outside of the assigned radio frequency ranges may not be exploited, passed on to third parties or otherwise misused. > In order to receive a good USW reception with the Micro system unwind the dipole antenna 2* on the rear panel of the device completely. > Ifthereceptionisinsufficientchangethepositionofthedipole antenna 2*. > The device has a built in ferrite antenna for reception of MWstations. WhentheMWreceptionisinsufficientplease turn the device in a more favourable direction. > To activate the radio function move the FUNCTION switch o to the "RADIO" position. > Now select with the BAND switch ithe desired frequency band FM or AM depending on which band the stations that you want to listen to are located. When the switch is in the FM ST position the device plays USW stations in stereo. > With the help of the TUNING controller y you can now select the stations. For this turn the controller in a clockwise direction to select stations with a higher broadcast frequency than the one currently shown in the display r. > Turn the TUNING controller y in a counter clockwise direction to select stations with a lower broadcast frequency than the one currently show in the display r. > Place the CD with the marked side up pointing towards the arbor of the CD disc in the CD tray. > To close the CD compartment push the cover q, by hand, downwards and by carefully pressing on the spot marked "DOOR OPEN" w on the cover q allow it to lock into place. The display r shows you the number of the currently playing back title, the playback symbol as well as "DISC". playback stop/resume > During playback press the button hon the device and/or the button PLAY/PAUSE 3^ on the remote control to stop playback. When CD playback is stopped the playback symbol as well as the number of the title just played back blink in the display r. > For this, during playback, hold down the button SKIP + t on the device and/or on the remote control 3! [. . . ] The titles on the MP3 CD will be played back from now on in random order. With the device you can playback audio signals from another suitable device (MP3 player etc. > For this connect the audio output of the other device via a cable with a 3. Cleaning the housing: > Remove the power plug from the power socket beforehand. [. . . ]