User manual KOMPERNASS KH 4227 PLUG-IN LIGHT

[. . . ] This appliance is not intended for use as sole illumination, for industrial or commercial applications or for use in occupational areas. The warranty does not provide compensation for damage caused by improper use of the appliance!1 Plug lamp made of brushed metal with an on/off switch 1 Energy-saving bulb 9 W, GU 10 1 Operating manual Do not permit children to handle electrical appliances without supervision, they cannot correctly assess the possible risks of injury. [. . . ] With areas on which the light falls directly, a distance of 50 cm must be maintained. Never use the appliance at locations where, should it inadvertently fall off, it would land on easily inflammable materials, e. This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. Children should be supervised to ensure that they do not play with the appliance. Assembling the lamp and taking it into use we have preassembled parts of the lamp. > First take all appliance components from the packaging and remove all packing foil and tape. > Insert the prongs of the bulb e carefully into the opening of the bayonet connector in the bulbholder w and then turn the bulb through ¼ rotation to the right. > Insert the lamp with its plug t into a properly installed and earthed mains power socket at a location that complies with the details given in the safety instructions. Arrange for the appliance to be checked and, if necessary, repaired by qualified technicians. Before changing the light bulb, ALWAYS wait for the bulb and the bulb holder to cool down. The light bulb e will heat up quickly - after the lamp has been switched off do not touch the bulb until it has cooled down, otherwise you will be burnt. Risk of potentially fatal electrical shock: Check to ensure that the appliance has been removed from the wall socket. NEVER submerse the appliance or its components in water or other fluids!Cleaning the appliance: Clean the appliance with a dry or lightly moistened cloth only. Do not use abrasive or aggressive cleaning agents, these could damage the upper surfaces. Check to ensure that the appliance has been removed from the wall socket. [. . . ] This appliance has been manufactured with care and meticulously examined before delivery. In the case of a warranty claim, please make contact by telephone with our service department. The warranty covers only claims for material and maufacturing defects, not for wearing parts or for damage to fragile components, e. [. . . ]