User manual KOMPERNASS KH 4225 METAL CLAMP LAMP

[. . . ] Connect the appliance only to electrical wall sockets with a mains voltage of 230-240 V ~ /50 Hz. Do not operate the appliance if the power cable or the plug are damaged. To avoid all risks, should the outer flexible power cable of this lamp be damaged, it may only be exchanged by the manufacturer, their service representative or a suitably qualified specialist. [. . . ] When a storm and/or thunderstorm with the risk of lightening threatens please disconnect the appliance from the mains power. Do not leave the appliance unattended at any time when it is in use. Only clamp the lamp to objects that can bear the weight of the lamp and will not be damaged by the clamp. Do not position the lamp close to inflammable objects, especially not close to curtains or drapes. Ensure that the lamp maintains an all round minimum distance of 35 cm to all surrounding objects. With areas on which the light falls directly, a distance of 50 cm must be maintained. Do not place the lamp at locations where, should it inadvertently fall off, it would land on easily inflammable materials, e. Place the lamp where it cannot be knocked off or damaged by falling objects. Arrange for the appliance to be checked and, if necessary, repaired by qualified technicians. Before changing the light bulb, ALWAYS wait for the bulb and the bulb holder to cool down. This appliance is not intended for use by individuals (including children) with restricted physical, physiological or intellectual abilities or deficiences in experience and/or knowledge unless they are supervised by a person responsible for their safety or receive from this person instruction in how the appliance is to be used. Children should be supervised to ensure that they do not play with the appliance. > Turn the bulb r anti-clockwise until it can be removed from the bulb holder. > Insert the new light bulb r into the bulb holder w and turn it clockwise until it is firmly fitted. First put the components together completely before operating the lamp. > First take all appliance components from the packaging and remove all packing foil and tape. > Unwrap the power cable u and insert the plug into a properly installed household mains power socket. > Secure the lamp with the clamp t at a location that complies with the details given in the safety instructions. [. . . ] The warranty covers only claims for material and maufacturing defects, not for wearing parts or for damage to fragile components, e. In the event of misuse and improper handling, use of force and interference not carried out by our authorized service branch, the warranty will become void. This product is subject to the provisions of European Directive 2002/96/EC. [. . . ]