User manual KOMPERNASS KH 4077 HALOGEN WORK SPOTLIGHTS

[. . . ] Under no circumstances may the Stand Halogen Floodlight be immersed in liquids, or liquids be permitted to permeate into the housing. Should liquids nonetheless gain entry into the appliance housing, immediately unplug the appliance from the mains supply and arrange for it to be repaired by qualified specialists. Never touch the Stand Halogen Floodlight, power cable or plug with wet hands · To unplug the appliance, always pull the plug from the socket, do not pull the cord itself · Do not crease or crimp the power cable and place it in such a way as to prevent anyone from stepping on or tripping over it. [. . . ] Always ensure that the Stand Halogen Floodlight is sufficiently distant from yourself and easily meltable items. To avoid eye damage, do not look directly into the Stand Halogen Floodlight. Never place the Stand Halogen Floodlight in the close proximity of easily inflammable materials. Q ON/OFF Switch w Floodlight lever e Halogen floodlight r Protective grill t Knurled screw y Crossbeam u Telescopic stand i Power cable o Knurled screw a Fixing ring s Distributor box d Knurled screw f Fixing screw g Glass cover Into the recesses on the corners before the glass covering g. ³ Squeeze the protective grill r so far together that the pegs on the other side of the protective grill can be inserted into the recesses there. ³ Do the same with the second halogen spotlight ³ Insert the knurled screw t with the washer through the hole in the bracket of the halogen floodlight e. ³ Insert the halogen floodlight e with the knurled screw t in the pre-drilled hole on the crossbeam y. Ensure that the Stoppers are located behind the halogen floodlights e. Never insert the plug into an electrical socket until the appliance has been completely assembled. Only touch the halogen lamps when they are in a switched-off and cooled-down condition. Never touch the lightbulb with bare hands, always use a clean and dry lint-free cloth. ³ Insert the knurled screw d first of all through the hole in the distributer box s, then through the hole in the crossbeam y. ³ Now assemble the crossbeam y and the distributor box s with the assistance of the knurled screw d on the telescopic stand u. Opening up the pedestal base ³ To set up the telescopic stand u, loosen the knurled screw, o. [. . . ] Under no circumstances may the appliance be immersed in water or held under running water during cleaning. Clean the exterior of the Stand Halogen Floodlight with a moist cloth. Switch the appliance off with the ON/OFF switch q, remove the plug from the socket and allow the Floor Halogen Floodlight to cool down. [. . . ]