User manual KOMPERNASS BALANCE KH 8099 BLOOD PRESSURE METER

[. . . ] The scales and display remote control unit can only be operated at temperatures between 10° and 40° Celsius. The scales should be kept within this temperature range even while not being used. Temperatures outside of this range can result in malfunctioning or longterm damages. Under no circumstances should you use the scales if you use a pacemaker, a respirator, an electrocardiograph or similar medical device! [. . . ] Stands for people who primarily carry out their daily activities standing or walking. In addition to serious athletes, this could include other occupations with extreme physical strain such as miners. Measuring body weight only To simply measure your current body weight: Lightly touch the top of the scales with your foot. To switch between display of the body weight in kg and lb (pounds/English measurement system): Briefly press the i button. If you remain standing on the scales, the device will automatically shut off after 30 seconds. If no new body weight measurement is carried out within 30 seconds, then the scales will turn off automatically. The display remote control unit will turn off automatically after 30 seconds if no buttons are pressed. Otherwise the scales can tilt to the side and be damaged beyond repair. Please make sure that the surface of the scales is dry before you stand on it. Measuring body weight, body fat, muscle mass and body water percentages as well as caloric requirement Always stand on the scales without shoes and socks on. Otherwise it is not possible to measure body fat, body water, muscle mass and caloric requirement. Weight body fat percentage muscle mass percentage body water percentage Press the on/off button to turn on the display remote control unit. Subsequently the number of one of the memory locations for personal data will blink on the screen. Remain standing on the scales while the current measurement results are being displayed. Select the memory location of your own personal data by pressing the up or down button. Press the i button when the memory location number corresponding to your personal data is displayed on the screen. And the percentage of body weight represented by body fat appears in the upper part of the display screen. Using the guest mode (GUES) All ten memory locations for personal data are already full Or if you want to measure body weight, body fat percentage, muscle mass percentage and body water percentage as well as caloric requirement without storing personal data. Subsequently the number of one of the memory locations for personal data will blink on the screen. Press the up or down button several times until "GUES" appears on the display screen. The percentage of your body weight which is body water the percentage of your body weight which is muscle mass your daily caloric requirement in kilocalories (kcal) Your body weight will continue to be displayed in the lower section of the display screen. Your general health condition is depicted by a symbol in the lower left corner of the display screen. [. . . ] In this case, move closer to the scales with the display remote control unit. There is an obstacle between the infrared receiver on the display remote control unit and the scales. The display remote control unit is being held at an angle which hinders connection between the infrared receiver and the scales. In this case, hold the display remote control unit with the infrared receiver facing the scales. [. . . ]