User manual KODAK ZM1

[. . . ] 2 Connecting the power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Handling and storing the color cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Installing and removing the color cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Handling and storing the paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] NOTE: If the card reader is already plugged in but the connection is no longer available, disconnect then reconnect the USB cable to re-establish the connection. 4 Insert the memory card into the card reader (see your card reader user's guide for details). 6 Use Kodak EasyShare software to transfer pictures from the card reader to your computer. The printer dock Transfer light blinks while the pictures are being transferred. The Transfer light continues to blink until the Transfer or Print button is pressed, or until the connection is no longer available. NOTE: With the software installed, pressing the Transfer button establishes one or more new drive connections for the card reader. You can view, copy, delete, and otherwise manage files on the new drives, as you do with other drives on your computer. Purchase a Kodak card reader and other accessories at a retailer of Kodak products, or visit www. kodak. com/go/accessories. www. kodak. com/go/support 25 Using the printer dock with a computer Printing from a computer We recommend using Kodak EasyShare software (included) for printing. This software lets you take advantage of a wide range of features, including full color enhancement, red-eye reduction, picture organization, and much more. If there are no pictures on your computer, use the printer dock to transfer pictures from your camera or memory card before printing (see page 24). IMPORTANT: Wait until printing is complete before removing paper or the paper tray. When storing, remove the paper tray, then close the paper tray cover (see page 7) and paper tray door to keep out dust and debris. Store paper flat. 30 www. kodak. com/go/support Care and maintenance Cleaning the paper feed roller To prevent misfeeds and to make sure your pictures look their best, we recommend that you keep the paper feed roller clean. Inspect the roller weekly for debris particles, and clean if necessary. 2 Remove the paper tray from the printer dock, and leave the paper tray door open. IMPORTANT: Do not use cotton or cotton swabs to clean the paper feed roller. 4 Use the moistened cloth to gently wipe clean the surface of the paper feed roller. Advance the feed roller with your thumb as necessary, and continue cleaning. 5 Allow the paper feed roller to fully dry before reconnecting the power. www. kodak. com/go/support 31 Care and maintenance Traveling with your printer dock IMPORTANT: When traveling, keep the printer dock, accessories, and supplies away from direct sunlight and out of high-temperature environments (such as a vehicle parked in the sun). Consider purchasing the AC power cord for the region to which you are traveling. 2 Remove the paper tray from the printer dock; close the paper tray cover and the paper tray door on the printer dock. 3 Repack the printer dock in the original packing box, or use the optional printer dock travel bag. [. . . ] Kodak will REPAIR or REPLACE Kodak digital cameras and accessories if they fail to function properly during the warranty period, subject to any conditions and/or limitations stated herein. Such repair service will include all labor as well as any necessary adjustments and/or replacement parts. Such repair or replacement is the sole remedy under this warranty. 52 www. kodak. com/go/support Appendix If replacement parts are used in making repairs, these parts may be remanufactured, or may contain remanufactured materials. If it is necessary to replace the entire product, it may be replaced with a remanufactured product. Limitations Request for Warranty service will not be accepted without proof of date of purchase, such as a copy of the original dated Kodak digital camera or accessory sales receipt. [. . . ]