User manual KODAK PLAYFULL WATERPROOF ZE2

[. . . ] 6 Reviewing videos/pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Deleting videos/pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Transferring, sharing online, editing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 3 Advanced features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Using the camera under water. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Normal Color, Sepia, B&W, High Saturation, or 70s Film HD 720P, WVGA Adjust sensitivity of the internal microphone. Set the date/time Choose which sites and email addresses are offered when you share. View firmware and ARCSOFT Software versions www. kodak. com/go/support 11 Advanced features Using the Settings menu in Review If you’re reviewing a video a picture you also get these choices and you press the Trim—See page 12. button Zoom and Pan—See page 13. Trimming a video Use the Trim Video feature to remove an unwanted video start and/or finish, leaving only the desired portion. 4 When prompted, press to move the Start marker to the new position, then press OK. NOTE: If you need to make adjustments, press to highlight the Start or End marker, then press to move it. 5 When prompted, preview your edit or save the edit without previewing. Save the video, or select Save As if you want to keep the existing video, as well. 12 www. kodak. com/go/support Advanced features Making a picture from a video You can choose a single frame from a video, then make it into a picture. (Size and quality depend on video resolution. ) 1 Press the Review button , then extract a single video frame. to find a video from which you want to 2 Play, then pause the video at the desired frame. to choose Make Picture, then press OK. 5 Follow the prompts to save the picture. Zooming and panning a picture 1 Press the Review button 2 Press 4 Use . When you turn on the camera again, you may need to reset the Date and Time. Camera Reset button www. kodak. com/go/support 15 Getting help Getting help on the Web Get support for your product (FAQs, troubleshooting information, arrange for repairs, etc. ) Purchase camera accessories (lenses, cards, etc. ) Download the latest camera firmware and software Register your camera Chat, e-mail, write, or phone Kodak (Chat not available in all languages) Get information on ARCSOFT Software Get creative tips and projects ideas www. kodak. com/go/Ze2support www. kodak. com/go/accessories www. kodak. com/go/Ze2downloads www. kodak. com/go/register www. kodak. com/go/contact www. arcsoft. com/support www. kodak. com/go/tips 16 www. kodak. com/go/support 5 Appendix Specifications Image Sensor—1/4-type CMOS, 1280 x 800 pixels Lens—3. 3 mm, f/2. 4 Zoom—2X digital LCD—5. 08 cm (2. 0 in. ); 112K pixels (480 x 234) Image Storage—32 MB internal memory (approximately 18 MB available for image storage. 1 MB equals one million bytes); optional SD/SDHC Card (The SD logo is a trademark of the SD Card Association. ) Maximum supported size: 32 GB SDHC. Focusing System—Fixed Focus Range—0. 5 m (1. 6 ft)–infinity (under water: 0. 7 m [2. 3 ft] –infinity) White Balance—Auto Exposure—Auto File Format—Still: JPEG with Kodak EXIF; Video: H. 264 (. MP4); Audio: MPEG-4 AAC LC ■ ■ ■ HDV/720p (1280 x 720 @ 30 fps) WVGA/30p (848 x 480 @ 30 fps) Still (4:3): 1 MP picture Shutter Speed—Auto Microphone—Mono ISO—Auto Speaker—Mono I/O Interface—USB 2. 0 (high speed); component output; HDMI www. kodak. com/go/support 17 Appendix Power—Built-in rechargeable Li-polymer battery, 450 mAh Waterproof —IEC 60529 IPX8 up to 3 m (9. 8 ft) Dustproof— IEC 60529 IP6X Shockproof —MIL-STD-810f shock equivalent 1. 5 m (5 ft) onto plywood IMPORTANT: The shock resistance and water resistance of this product are based on Kodak test results and do not constitute any guarantee that the product will perform, will not be damaged, or will not malfunction under such conditions. Though the camera is designed to withstand the effects of impact occurring during normal use, impact due to rough handling (such as throwing or dropping it from excessive heights) can cause serious damage. Even if a drop does not result in functional problems, it can cause scratching and other cosmetic damage to the camera. Battery life—Approximately 75 minutes in video recording mode, HDV @ 30 fps Size—55 x 93. 3 x 12 mm (2. 2 x 3. 7 x 0. 5 in. ) Weight—85 g (3. 0 oz) with memory card Operating temperature—0–40° C (32–104° F); do not expose camera to higher temperatures. Safety CAUTION: Do not disassemble this product; there are no user-serviceable parts inside. KODAK AC Adapters and battery chargers are intended for indoor use only. The use of controls, adjustments, or procedures other than those specified herein may result in exposure to shock and/or electrical or mechanical hazards. Contact Kodak customer support. ■ ■ The use of an accessory that is not recommended by Kodak may cause fire, electric shock, or injury. Use only a USB-certified computer equipped with a current-limiting motherboard. www. kodak. com/go/support 18 Appendix Contact your computer manufacturer if you have questions. ■ ■ ■ ■ If using this product in an airplane, observe all instructions of the airline. Do not disassemble or expose batteries to liquid, moisture, fire, or extreme temperature. [. . . ] This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected; 4) consult the dealer or an experienced radio/TV technician for additional suggestions. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. [. . . ]