User manual KODAK PHOTO PRINTER 500

[. . . ] Kodak EasyShare photo printer 500 User's Guide www. kodak. com For interactive tutorials, www. kodak. com/go/howto Eastman Kodak Company Rochester, New York 14650 © Eastman Kodak Company, 2005 All screen images are simulated. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. Eastman Kodak Company is an authorized licensee of the CompactFlash trademark. Kodak, EasyShare, and XtraLife are trademarks of Eastman Kodak Company. [. . . ] NOTE: When properly inserted, the card sticks out slightly, serving as an antenna for receiving Wi-Fi signals. If the Kodak Wi-Fi card is already inserted but the connection is no longer available, remove then reinsert the card to re-establish the connection. To remove the card, push in and release it. When the card is ejected, pull it out. 3 Make sure the printer driver from the included Kodak EasyShare software CD is installed on your computer. Then connect the printer to your computer with the USB cable (see page 19). 4 Configure the printer Wi-Fi settings (such as SSID and security) and add the printer as a wireless printer on your Wi-Fi wireless network: Windows OS--Configure the printer Wi-Fi settings: a From the Start menu, select Programs (or All Programs). e Change settings as necessary to match the settings of your Wi-Fi wireless network. 30 www. kodak. com/go/support Using the wireless features of your photo printer Add the printer as a wireless printer to your computer: a From the Start menu, select Programs (or All Programs). The wireless printer is added to your computer (represented as a wireless "copy" of your printer in the Windows OS list of printers). Mac OS X--Add the printer to your computer: See Connecting to a computer, page 19. Configure the printer Wi-Fi settings: a Open the finder window, then click the Applications button. (Or open the Applications folder on your operating drive. ) b Open the Utilities folder, then double-click Print Setup Utility. d Change Wi-Fi settings as necessary to match the settings of your Wi-Fi wireless network. 5 Close all programs on your computer, then disconnect the USB cable between the computer and the printer. 6 (Optional) Print a copy of your wireless settings for future reference: At the same time, press and hold the Print button and the Transfer button for 5 seconds. www. kodak. com/go/support 31 Using the wireless features of your photo printer Print pictures over your Wi-Fi wireless network 1 Add the photo printer to your Wi-Fi wireless network (see page 23). IMPORTANT: Add the printer to the same network as the computer or device you want to print from. If printing from EasyShare software, make sure Enable WIreless Connections is selected in Preferences. (For details, click the Help button in EasyShare software. ) 2 On your computer (or your Wi-Fi enabled device), select and print pictures. See your computer or device user's guide for details. Transfer pictures over your Wi-Fi wireless network (EasyShare digital cameras only) 1 Add the photo printer to your Wi-Fi wireless network. IMPORTANT: Add the printer to the same network as the computer or device you want to print from. If you have two or more computers on the same network, use the Kodak wireless printer configuration utility on your computer to choose which computer to transfer to. (For details, see the wireless configuration utility Help. ) 2 Connect your EasyShare digital camera to the printer (see page 22), then press the Transfer button. NOTE: If the printer is connected to the computer with a USB cable, pictures are transferred using the cable connection, not the wireless connection See your computer or device user's guide, or visit www. kodak. com/go/wifisupport and www. wi-fi. org for more information. 32 www. kodak. com/go/support 6 Care and maintenance General care IMPORTANT: Always disconnect the power before cleaning. [. . . ] This equipment generates, uses, and can radiate radio frequency energy and, if not installed or used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected; 4) consult the dealer or an experienced radio/TV technician for additional suggestions. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. [. . . ]