User manual KODAK P520

[. . . ] ** Tap below small arrows at the ends of the scroll bar to move the highlight one picture, menu, or item at a time. Important:The screen is not touch-sensitive. Sharp or metal objects may damage the border or screen www. kodak. com/go/digitalframesupport 5 Getting started Enjoying your pictures immediately! To view your pictures or play a slide show, insert a memory card, or connect a camera or other USB device (see page 8). To change the slide show order, see page 13. 6 www. kodak. com/go/easysharecenter Getting started Inserting a memory card MultiMedia Card SD/SDHC Memory Stick xD SD/SDHC P520/P720/P725 digital frame P820 digital frame To insert a card, push the card firmly into the slot until it stops. To remove a card from: ­ top card slot, push in the card to release it. ­ side card slot, pull out the card. [. . . ] --organize, edit, and CD packaged with your frame. Installing Kodak EasyShare digital display software Insert the CD into your computer and follow the on-screen instructions to install the software. NOTE: Click Typical to install EasyShare digital display software and to update a previous version of EasyShare software. If you do not have a previous version of EasyShare software on your computer, you can click Custom and choose both applications for a new installation. The software icons appear on your desktop when the installation is complete. When prompted, take a few minutes to electronically register your frame and software for exclusive tips and offers. To register later, visit www. kodak. com/go/register. www. kodak. com/go/digitalframesupport 17 Doing more with your frame Copying with EasyShare digital display software 1 On your computer's desktop, double-click software) to start using the software. (Kodak EasyShare digital display 2 Insert a memory card into your computer or card reader. 4 In Pictures & Videos, click the folder or location on your computer that contains the pictures you want to copy. 5 In the Viewer pane, select the pictures, then drag and drop them to the card or USB device in the Drag & Drop Zone. 6 Remove the card from your computer and insert it into your frame card slot or a connected card reader. NOTE: To maintain the slide show order during playback, see page 13 and select Filename, A - Z. In the top a memory card, camera, card slot, make sure the card is seated flush with the case. or USB device is Make sure the USB cable that was included with your camera or USB connected. NOTE: A large picture file or images on a large capacity Make sure the file format of your pictures is supported. card may take longer to appear. Touch border doesn't work. Use your finger to make your selections on the Quick Touch Borders (see page 5). Unplug the power cable from the frame. button on the back of the frame (see page 20). Frame freezes up. Unplug the power cable from the frame. Wait 5 seconds, then Use a paper clip or other slim object to press the recessed reset www. kodak. com/go/digitalframesupport 21 4 Appendix CAUTION: Important safety instructions Do not disassemble this product; there are no user-serviceable parts inside. Do not expose this product to liquid, moisture, or extreme temperatures. The use of controls, adjustments, or procedures other than those specified herein may result in exposure to shock and/or electrical or mechanical hazards. Contact Kodak customer support. The use of an accessory that is not recommended by Kodak may cause fire, electric shock, or injury. Digital frame battery (internal and non-removable) may include perchlorate material. Use only the AC adapter supplied with your frame to avoid damage to the frame. [. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) reorient or relocate the receiving antenna; 2) increase the separation between the equipment and the receiver; 3) connect the equipment to an outlet on a circuit different from that to which the receiver is connected; 4) consult the dealer or an experienced radio/TV technician for additional suggestions. 24 www. kodak. com/go/easysharecenter Appendix Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulation. FCC and Industry Canada This device complies with Industry Canada RSS-210 and FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CE Hereby, Eastman Kodak Company declares that this Kodak product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. [. . . ]