User manual KODAK ESP9200

[. . . ] Move the left paper-edge guide to the far left and the front paper-edge guide forward. Fan and stack the photo paper, then insert it (short side first) into the tray with the logo side facing up and the glossy side down. IMPORTANT: If the photo paper is loaded the wrong way, the ink on your pictures will be wet and the image quality will be affected. Move both the left and front paper-edge guides until they touch the paper. [. . . ] Before sending or receiving faxes, make sure that a wall phone line is plugged into the Line in port on the back of the printer. To order supplies, make sure that your computer is connected to the Internet, then: 1. Select the item(s) you want to buy, then follow the on-screen instructions. Some problems can be resolved quickly by power cycling the printer: Turn off your printer. Use the following information to help troubleshoot problems with your printer. Printer does not power on Printer not detected Make sure you are using the power cord that came with your printer. ⷠMake sure the power cord is connected to the AC adapter and is plugged into an outlet or power strip. ⷠMake sure that your printer is plugged in and turned on, and that the on/off LED is glowing steadily. ⷠIf you are using a USB cable, make sure that: ­ it is connected to both your printer and your computer. ­ you restart the computer if the USB cable was disconnected from The printer then reconnected, or if power to the printer was interrupted. ⷠIf you are using a wireless connection, make sure that: Services needed for your printer. (The printhead and ink cartridges are installed correctly when you hear them click into place. ) · For best results, use KODAK Paper or a paper with the COLORLOK Technology logo on the package. ⷠMake sure the paper is loaded correctly (see page 4). ⷠPress down on the center latch, open the duplexer cover, and gently remove any paper from inside the duplexer; close the duplexer cover. ⷠPress the side detents on the duplexer, and remove the duplexer to access the cleanout area; remove any paper or debris, then replace the duplexer. ⷠMake sure the paper in the tray is free of tears or creases. Use our Step-by-Step Solutions and Repair tool to troubleshoot common problems. Check the Extended User Guide for detailed instructions and the recommended system requirements Get help with problems you cannot resolve. Printer when you open the printer access door) ­ Printer model number (located on the control panel) Use only the power source indicated on the product regulatory label. ⷠIf you do not use this product for a long period of time, unplug it from the electrical outlet. ⷠAlways turn this product off by using the On/Off button. [. . . ] You may be required to send Products, at your expense, to the authorized service facility for the country where the Products were purchased. Kodak will repair or replace Products if they fail to function properly during the warranty period, subject to any conditions and/or limitations stated herein. Warranty service will include all labor as well as any necessary adjustments and/or replacement parts. If Kodak is unable to repair or replace a Product, Kodak will, at its option, refund the purchase price paid for the Product provided the Product has been returned to Kodak together with proof of the purchase price paid. [. . . ]