User manual KODAK EASYSHARE P520 P720 P820

[. . . ] ** Tap below small arrows at the ends of the scroll bar to move the highlight one picture, menu, or item at a time. Important:The screen is not touch-sensitive. Sharp or metal objects may damage the border or screen www. kodak. com/go/digitalframesupport 5 Getting started Enjoying your pictures immediately! ■ To view your pictures or play a slide show, insert a memory card, or connect a camera or other USB device (see page 8). To change the slide show order, see page 13. 6 www. kodak. com/go/easysharecenter Getting started Inserting a memory card MultiMedia Card SD/SDHC Memory Stick xD SD/SDHC P520/P720 digital frame ■ ■ P820 digital frame To insert a card, push the card firmly into the slot until it stops. To remove a card from: – top card slot, push in the card to release it. – side card slot, pull out the card. [. . . ] NOTE: Click Typical to install EasyShare digital display software and to update a previous version of EasyShare software. If you do not have a previous version of EasyShare software on your computer, you can click Custom and choose both applications for a new installation. The software icons appear on your desktop when the installation is complete. When prompted, take a few minutes to electronically register your frame and software for exclusive tips and offers. To register later, visit www. kodak. com/go/register. ■ www. kodak. com/go/digitalframesupport 17 Doing more with your frame Copying with EasyShare digital display software 1 On your computer’s desktop, double-click software) to start using the software. (Kodak EasyShare digital display 2 Insert a memory card into your computer or card reader. 4 In Pictures & Videos, click the folder or location on your computer that contains the pictures you want to copy. 5 In the Viewer pane, select the pictures, then drag and drop them to the card or USB device in the Drag & Drop Zone. 6 Remove the card from your computer and insert it into your frame card slot or a connected card reader. In the top a memory card, camera, card slot, make sure the card is seated flush with the case. or USB device is ■ Make sure the USB cable that was included with your camera or USB connected. NOTE: A large picture file or ■ Make sure the file format of your pictures is supported. See the images on a large capacity extended user guide at www. kodak. com/go/digitalframesupport. card may take longer to appear. Touch border doesn’t work. ■ Use your finger to make your selections on the Quick Touch Borders (see page 5). ■ Unplug the power cable from the frame. Press and hold the power button for 1 second. Frame freezes up. ■ Unplug the power cable from the frame. Press and hold the power button for 1 second. ■ Use a paper clip or other slim object to press the recessed reset button on the back of the frame (see page 20). www. kodak. com/go/digitalframesupport 21 4 Appendix CAUTION: Important safety instructions Do not disassemble this product; there are no user-serviceable parts inside. Do not expose this product to liquid, moisture, or extreme temperatures. The use of controls, adjustments, or procedures other than those specified herein may result in exposure to shock and/or electrical or mechanical hazards. Contact Kodak customer support. ■ The use of an accessory that is not recommended by Kodak may cause fire, electric shock, or injury. ■ Digital frame battery (internal and non-removable) may include perchlorate material. Use of other AC adapters may damage the frame and void your warranties. ■ When displayed with the stand extended, the frame rests at a 68 - 90 degree angle. [. . . ] Where shielded interface cables have been provided with the 24 www. kodak. com/go/easysharecenter Appendix product or specified additional components or accessories elsewhere defined to be used with the installation of the product, they must be used in order to ensure compliance with FCC regulation. FCC and Industry Canada This device complies with Industry Canada RSS-210 and FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CE Hereby, Eastman Kodak Company declares that this Kodak product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Canadian DOC statement DOC Class B Compliance—This Class B digital apparatus complies with Canadian ICES-003. [. . . ]