User manual KODAK DC200 PLUS

[. . . ] Chap1newBook Page 1 Friday, February 5, 1999 7:02 AM KODAK DC200 Plus Camera and KODAK DC210 Plus Zoom Camera User's Guide for the cameras, KODAK Installation Software, KODAK DC200/DC210 Mounter Software, and KODAK Acquire/TWAIN Software. Visit Kodak on the World Wide Web at www. kodak. com Chap1newBook Page 2 Friday, February 5, 1999 7:02 AM ©Eastman Kodak Company, 1999 Kodak, FlashPix, Photolife are trademarks of Eastman Kodak Company. The FlashPix format is defined in a specification and test suite developed and published by Kodak in collaboration with Microsoft, Hewlett-Packard, and Live Picture. Only products that meet the specification and pass the test suite may use the FlashPix name and logo. Chap1newBook Page i Friday, February 5, 1999 7:02 AM Table of Contents Table of Contents Chapter-Page Table of Contents . . 3-4 i Chap1newBook Page ii Friday, February 5, 1999 7:02 AM Preferences . . 7-6 ii Chap1newBook Page iii Friday, February 5, 1999 7:02 AM TWAIN Software . [. . . ] The next time you take a picture, it will appear for a moment on the LCD screen. To cancel Quickview: press a / button until OFF is highlighted and then press the DO-IT button. The Quickview setting is maintained until another setting is selected. This setting does not change when the camera is turned off. 4-7 Chap1newBook Page 8 Friday, February 5, 1999 7:02 AM Date and Time The Date and Time screen is used to set the camera's date and time. 2 Turn the camera on. The LCD displays the Preferences screen. 3 Press a / button until the Date/Time icon is highlighted on the second Preferences screen. The LCD displays the main Date/Time screen with the current date and time listed. 4 Press the DO-IT button. 5 Press a 6 Press a / button to highlight the day, month, year, hour, or minute setting. / button to adjust the setting. 7 Repeat steps 5 and 6 until the information is correct. 8 Press the DO-IT button. The main Preferences screen reappears. To reset: the Date and Time setting is maintained until another setting is selected. This setting does not change when the camera is turned off. If batteries are removed from the camera for more than a few minutes, the Date/Time will be deleted and must be reset. If batteries are removed from the camera when the camera is on, the Date/Time may be deleted and must be reset. 4-8 Chap1newBook Page 9 Friday, February 5, 1999 7:02 AM LCD Brightness The LCD Brightness screen is used to adjust the brightness of the LCD screen. To adjust the LCD brightness: 4 Preferences 1 Set the Mode dial to Preferences. 2 Turn the camera on. The LCD displays the Preferences screen. 3 Press a / button until the LCD Brightness icon is highlighted on the second Preferences screen. The LCD displays the main LCD Brightness screen. 4 Press the DO-IT button. 5 Press a / button to adjust the brightness of the LCD screen to the appropriate level. The brightness of the LCD screen changes as the setting is adjusted. 6 Press the DO-IT button. The main Preferences screen reappears. To reset: the LCD Brightness setting is maintained until another setting is selected. This setting does not change when the camera is turned off. 4-9 Chap1newBook Page 10 Friday, February 5, 1999 7:02 AM Format Memory Card The Format Memory Card screen formats the memory card while it is in the camera. When a memory card is formatted it erases everything, including any templates on the card, and sets up new directories and pointers on the memory card. 2 Turn on the camera. The LCD displays the Preferences screen. 3 Press a / button until the Format Memory Card icon is highlighted on the third Preferences screen. The LCD displays the main Format Memory Card screen. 4 Press the DO-IT button. 5 Press a / button until CONTINUE FORMAT is highlighted. The card is formatted and the main Preferences screen reappears. 6 Press the DO-IT button. To cancel format: press a / button until CANCEL FORMAT is highlighted and then press the DO-IT button. The card is not formatted and the main Preferences screen reappears. 4-10 Chap1newBook Page 11 Friday, February 5, 1999 7:02 AM Video Out The Video Out screen is used to set the camera's video output format to NTSC or PAL. To set the video out format: 4 Preferences 1 Set the Mode dial to Preferences. 2 Turn on the camera. The LCD displays the Preferences screen. 3 Press a / button until the Video Out icon is highlighted on the third Preferences screen. The LCD displays the main Video Out screen. The current setting is checked (ü). 4 Press the DO-IT button. 5 Press a button until the appropriate option is highlighted. / 6 Press the DO-IT button. The main Preferences screen reappears. To reset: the Video Out setting is maintained until another setting is selected. This setting does not change when the camera is turned off. 4-11 Chap1newBook Page 12 Friday, February 5, 1999 7:02 AM Language The Language screen is used to select a language interface for the camera. When a specific language is selected, the LCD screens on the back of the camera will change to reflect the language selected. 2 Turn the camera on. The LCD displays the Preferences screen. 3 Press a / button until the Language icon is highlighted on the third Preference screen. The LCD displays the main Language screen. The current setting is checked (ü). 4 Press the DO-IT button. 5 Press a / button until the appropriate language is highlighted. The main Preferences screen reappears. 6 Press the DO-IT button. To change Language: press a / button until another language is highlighted and then press the DO-IT button. [. . . ] PLEASE RETURN THE WARRANTY REGISTRATION CARD WITHIN 30 DAYS OF PURCHASE. THIS WARRANTY BECOMES NULL AND VOID IF YOU FAIL TO PACK YOUR DC200/DC210 CAMERA IN A MANNER CONSISTENT WITH THE ORIGINAL PRODUCT PACKAGING AND DAMAGE OCCURS DURING PRODUCT SHIPMENT. THIS WARRANTY DOES NOT COVER: CIRCUMSTANCES BEYOND KODAK'S CONTROL; SERVICE OR PARTS TO CORRECT PROBLEMS RESULTING FROM THE USE OF ATTACHMENTS, ACCESSORIES OR ALTERATIONS NOT MARKETED BY KODAK; SERVICE REQUIRED AS THE RESULT OF UNAUTHORIZED MODIFICATIONS OR SERVICE; MISUSE, ABUSE; FAILURE TO FOLLOW KODAK'S OPERATING, MAINTENANCE OR REPACKAGING INSTRUCTIONS; OR FAILURE TO USE ITEMS SUPPLIED BY KODAK (SUCH AS ADAPTERS AND CABLES). KODAK MAKES NO OTHER WARRANTIES, EXPRESS, IMPLIED, OR OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE FOR THIS EQUIPMENT OR SOFTWARE. [. . . ]