User manual KODAK DC20

[. . . ] Country Portugal Russia Singapore South Africa Spain Sweden Switzerland Taiwan Thailand Help number 351-1-4149-500 351-14194-321 (fax) 7-095-929-9166 7-095-929-9170 (fax) 65-470-9875 65-479-8397 (fax) 27-11-804-2852 27-11-804-5013 (fax) 900-98-4485 44-131-458-6962 (fax) 020-793169 44-131-458-6962 (fax) 155-1034 44-131-458-6962 (fax) 886-2-893-8210 886-2-895-1069 (fax) 66-2-271-3040 66-2-279-5073 (fax) Country Turkey UK Help number 90-216-342-3332 90-216-343-6743 (fax) 0800-281487 44-0-131-458-6962 (fax) 20 Country France Finland Germany Greece Hong Kong Hungary India Ireland Italy Japan Help number 05-90-62-81 44-131-458-6962 (fax) 0800-1-17056 44-131-458-6962 (fax) 0130-82-54-02 44-131-458-6962 (fax) 30-1-689-8620 30-1-689-8635 (fax) 852-2564-9330 852-2562-4258 (fax) 36-1-269-71-17 36-1-269-71-13 (fax) 91-22-617-5823 91-22-617-6004 (fax) 44-131-458-6714 44-131-458-6962 (fax) 1678-72996 44-131-458-6962 (fax) 81-3-5488-2390 81-3-5488-4512 (fax) Country Korea Help number 82-2-708-5400 82-2-708-5500 (fax) Latin America 1-305-267-4796 1-305-267-4770 (fax) Lebanon 961-1-883822 961-1-881726 (fax) Malaysia 60-3-757-2722 60-3-755-5919 (fax) Mexico 52-5-326-3848 91-800-36412 Middle East 971-4-444-910 971-4-447-059 (fax) Netherlands 06-0224428 44-131-458-6962 (fax) New Zealand 0800-500-135 64-9-302-8637 (fax) Norway 800-1-1848 44-131-458-6962 (fax) Philippines 63-2-810-0331 63-2-816-6718 (fax) 19 Appendix B. . . If you have questions concerning the operation of the DC20 camera you may speak directly to a customer support representative. and Canada--call toll free, 1-888-375-6325, between the hours of 9:00 a. m. In Europe--call the Kodak European Information Centre, toll free (number associated with your location) or UK toll line, 44-(0)-131-458-6714, between the hours of 09. 00 and 17. 00 hours (GMT/CET) Monday through Friday. Outside the U. S. , Canada, and Europe--call the number associated with your location. [. . . ] Subject or the camera moved while image was captured. Solution Keep hands, fingers, or other objects away from the lens when capturing images. Make sure the Power, Busy, and Memory Full lights are off before inserting or removing the battery. Wait 1 minute, return battery to camera, and turn camera on. Stored images are damaged. Blurred images Power, Busy, and Memory Full Static electricity or lights simultaneously turn on inappropriate operation. and the Shutter button jams. If the difficulties persist, refer to the Where to Get Help section of this user's guide. 13 Troubleshooting. . . If you are experiencing difficulties with your DC20 camera, check the following table for possible solutions. Problem Power light blinks or does not turn on and the camera does not work. Images remain in the camera's memory when the battery is removed. Press the Power button and verify that the green Power light turns on. Wait until Busy light turns off before attempting to capture another image. Transfer images to your computer and erase them from the camera's memory. Camera is not turned on. Shutter button does not work. Busy light is on. Camera memory is full. 12 Troubleshooting. . . If you are experiencing difficulties with your DC20 camera, check the following table for possible solutions. Problem Power light blinks or does not turn on and the camera does not work. Images remain in the camera's memory when the battery is removed. Press the Power button and verify that the green Power light turns on. Wait until Busy light turns off before attempting to capture another image. Transfer images to your computer and erase them from the camera's memory. Camera is not turned on. Shutter button does not work. Busy light is on. Camera memory is full. 12 Connecting to a Computer. . . 1 Turn off the DC20 camera. 2 Plug one end of the serial cable into the printer or modem port (on a Macintosh) or a COM port (on a PC) on the back of your computer. 3 Lift the rubber tab on the camera. 4 Plug the other end of the serial cable into the camera's serial port. 5 Turn on the camera. Macintosh computer PC or compatible computer Once the DC20 camera is connected to your computer, you are now ready to transfer the images. Refer to the software's getting started guide or on-line help for instructions on how to install the software. Refer to your monitor's user's manual for instructions. . If your computer has a 25-pin port, you need to purchase a 9-pin adapter and attach it to the port before attaching the serial cable to the computer. 11 Connecting to a Computer. . . 1 Turn off the DC20 camera. 2 Plug one end of the serial cable into the printer or modem port (on a Macintosh) or a COM port (on a PC) on the back of your computer. 3 Lift the rubber tab on the camera. 4 Plug the other end of the serial cable into the camera's serial port. 5 Turn on the camera. Macintosh computer PC or compatible computer Once the DC20 camera is connected to your computer, you are now ready to transfer the images. Refer to the software's getting started guide or on-line help for instructions on how to install the software. Refer to your monitor's user's manual for instructions. . If your computer has a 25-pin port, you need to purchase a 9-pin adapter and attach it to the port before attaching the serial cable to the computer. 11 Software Applications. . . The DC20 comes complete with creative software applications, and TWAIN or Plug-In ability to interface with other applications. [. . . ] Instructions on how to install and use the enclosed software is available in the software's getting started guide or on-line help. the Troubleshooting section of this user's guide. for help with non-Kodak products packaged with the DC20 camera, contact the manufacturer of that product. World Wide Web at http://www. kodak. com product information by fax, refer to Appendix A. technical support, refer to Appendix B for the appropriate phone number. [. . . ]