User manual KLIPSCH ROOMGROOVE

[. . . ] If it still won't fit, contact a qualified electrician to change the outlet, or use a different one. The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons. WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture. WARNING: Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. [. . . ] In systems not incorporating a CS-700 system (or if the cinema system in not intended to be part of the wireless multi-room system), two RoomGrooves can transmit simultaneously. To enable this feature, all components of the wireless multi-room system must be assigned to a home code from 5 to 9. Selecting a home code from 5 to 9 will allow a second RoomGroove to occupy the wireless channel which was previously assigned to the CS-700. (See "Setting the Home Code" for more detailed information. ) If two RoomGrooves are transmitting and you wish to transmit from a third and control which wireless channel will be used for the new transmission, you must first select the broadcast you wish to terminate by pressing the "Listen" button until that source is heard. Then press transmit and the new source will occupy that wireless channel and stop the transmission of the other source. You should now hear the new source in all the locations in which the previous source was playing. Note: If a RoomGroove is transmitting and a second RoomGroove is told to transmit, the second RoomGroove will bump the first RoomGroove and occupy that wireless channel. If you wish to configure your wireless multi-room system to allow two RoomGrooves to simultaneously transmit, see the "Transmitting Audio from Two RoomGrooves" section of this manual. Listening to Other KlipschCast Devices with Your RoomGroove The RoomGroove is designed to allow you to listen to sources connected to, or integrated into, other KlipschCast components such as another RoomGroove or the CS-700 DVD Entertainment System. To listen to a source being transmitted by another KlipschCast device, simply press the "Listen" button to access the transmitted source. The "Listen" light becomes red (or purple for a second wireless source) when a wireless source is received and played. Note: All devices in the wireless multi-room system must be set to the same home code in order for transmissions to take place. The home code dial on the rear of your RoomGroove allows you to select a code specific to all of your KlipschCast components to avoid interference from neighboring systems. All of your KlipschCast components will initially be set to 0 and allow one wireless channel to broadcast audio from a cinema system and the second wireless channel to broadcast wireless audio from a RoomGroove. The home code number should only be changed for one of two reasons: 1) There is interference from a neighboring system ­ If a neighboring system in interfering with your wireless system, simply change all KlipschCast components to another home code. KlipschCast components will only transmit and receive audio from components on the same home code. Home codes 0 through 4 can be used for systems transmitting audio from a cinema system and a RoomGroove (home codes 5 through 9 are reserved for systems transmitting from two separate RoomGrooves and no cinema system). 2) You wish to transmit audio from two RoomGrooves (not a cinema system) ­ If you wish to transmit audio from two separate RoomGrooves and not a cinema system, simply choose a home code from 5 to 9 and change all KlipschCast components to that home code. KlipschCast components will only transmit and receive audio from components on the same home code. Once the home code has been changed, you must disconnect and reconnect the power cord from the wall outlet for the change to be made. This will change the home code and allow the component to talk to other KlipschCast components set to the same home code. [. . . ] This device generates and uses radio frequency (RF) energy, and if not installed and used properly, this equipment may cause interference to radio and television reception. If this equipment does cause interference to radio or television reception (which you can determine by unplugging the unit), try to correct the interference by one or more of the following measures: · Move the unit away from the equipment that is receiving interference. ⷠPlug the unit into a different wall outlet so that the unit and the equipment receiving interference are on different branch circuits. If these measures do not eliminate the interference, please consult your dealer or an experienced radio/television technician for additional suggestions. [. . . ]