User manual KLIPSCH LIGHT SPEAKER SYSTEM

[. . . ] Tech Support: 1-800-KLIPSCH One complete system that installs in 30 minutes or less! State-of-the-art LIGHT & SOUND OWNER'S MANUAL AND INSTALLATION INSTRUCTIONS 1 Tech Support: 1-800-KLIPSCH The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Le symbole de l'éclair fléché dans un triangle équilatéral, a pour but d'avertir l'utilisateur de la présence non isolées d'une «tension dangereuse» dans le boîtier du produit que mai d'une magnitude suffisante pour constituer un risque d'électrocution pour les personnes. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Le point d'exclamation dans un triangle équilatéral sert à alerter l'utilisateur de la présence d'importantes exploitation et de maintenance (entretien) dans la documentation accompagnant l'appareil. Attention marquage est situé sur le côté de l'appareil. [. . . ] Using the supplied audio cords, plug your MP3, CD Player, television or other desired sources to the back of the transmitter. Attach 1 or 2 audio sources. MP3 A) Locate the sources you want to use. You will need to have the proper cable from the source you want to attach to the Transmitter. You have two choices: 1) RCA to RCA cable 2) RCA to Stereo Mini Plug Cable 23 Tech Support: 1-800-KLIPSCH CAUTION!B) If you are attaching only one source it may be attached to either input but may be convenient to attach to source one. 1) You may use either the mini-plug or the RCA inputs on either source but only one input may be used at a time. The remote control and the transmitter are controlled in exactly the same manner. When you push a button on the remote contol the small LED next to the button will light up and remain lit until you push another button affecting either that zone or that source. The LEDs that are lit will tell what action the remote or transmitter is currently set to control. Step 11: Enjoy your LightSpeakers®! 24 Tech Support: 1-800-KLIPSCH Operating the Transmitter and Remote Control: The remote control and the transmitter are controlled in exactly the same manner. When you push a button on the remote contol the small LED next to the button will light up and remain lit until you push another button affecting either that zone or that source. The LEDs that are lit will tell what action the remote or transmitter is currently set to control. Here are the steps to take to operate the Transmitter and Remote Control: A) Press the zone you want to control B) When the LED next to the button lights, that zone is active and will be playing the source that is currently lit. To change to a different source simply press the source with the "unlit" LED until the LED next to the source you are choosing lights. C) Pressing Light once makes the light go On/Off D) Pressing the + arrow above the light "on" button will increase the brightness of the light. Pressing the "-" arrow below the light on/off button will dim the 25 Tech Support: 1-800-KLIPSCH light. The LED will flash when the arrows are pushed and will turn red and flash quickly when either the maximum or minimum brightness is reached. E) Pressing and holding the ON/OFF button turns ON or OFF all Zones with source 1 playing if turned ON. F) When Power is applied to a LightSpeaker® by the wall switch the light defaults to the ON state. This allows the LightSpeaker's LED to function like a light bulb. NOTE: If your remote does not operate, or you have purchased additional remotes to be used with the same transmitter, please see Trouble shooting on page 41 of this manual. 26 Tech Support: 1-800-KLIPSCH Helpful Hints Types of Recessed Ceiling Light Fixtures The most important step you can take to simplify the installation of your LightSpeakers® is to know, before you purchase, which type of ceiling light fixtures are installed in your ceilings. The two most common recessed lighting fixtures, and the ones that your LightSpeakersTM are designed to best fit into, are the R30 and the R40 fixtures. [. . . ] If your dealer is not equipped to perform the repair of your KLIPSCH product, it can be returned, freight paid, to KLIPSCH for repair. You will need to ship this product in either its original packaging or packaging affording an equal degree of protection. Proof of purchase in the form of a bill of sale or receipted invoice from an authorized dealer, which is evidence that this product is within the Warranty period, must be presented or included to obtain Warranty service. This Warranty is invalid if (a) the factory-applied serial number has been altered or removed from this product or (b) this product was not purchased from a KLIPSCH authorized dealer. [. . . ]