User manual KLIPSCH KHW-5

[. . . ] This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. K H W-5 SPEAKER PLACEMENT Designed to function in any standard wall, ceiling or drop ceiling, Klipsch in-wall speakers are engineered for years of performance. Minimum construction requirements call for drywall or other mounting surfaces to be at least 3/8" thick. When planning speaker placement, maximum performance is realized when speakers are placed at equal distance from the listener and along a common wall. [. . . ] Cut the appropriate size opening in the wall using the template provided. Cutout dimensions are provided in the "Specification" section at the back of this manual. If accuracy of cut (straightness/squareness) cannot be achieved, you may add 1/4" to each dimension. Avoid compromising any fire stops between studs. Included in Rough-in Kit Carton ARCHITECTURAL SPEAKERS 2. (a) If you want to paint the decorative frame and the wall together, insert the frame and attach with the dogs. (b) If you will not be re-painting, you may immediately install the frame and speaker assembly. The frame's mounting dogs will "sandwich" the wall and frame together. The module is installed with the screws and the grille is pressed into place. 1. Cutout dimensions are provided in the "Specification" section at the back of this manual. If accuracy of cut (a perfect circle) cannot be achieved, you may add up to 1/4" to the radius. (a) If you want to paint the decorative frame and the ceiling together, insert the speaker assembly and attach with the dogs. (b) If you won't be re-painting, you may immediately install the speaker assembly. The frame's mounting dogs will "sandwich" the ceiling and frame together. The module is installed with the screws and the grille is pressed in place. K H W-5 OPERATING CONTROLS Tweeter Switch If installing in an acoustically bright room, such as some bathrooms and kitchens, you may want to adjust the tweeter level located on the front baffle. The position of this switch should always be checked prior to speaker module installation. Infrared Sensor Mount The KHW-5 features a 1/2" infrared sensor locator on the baffle. The location of the knock-out is shown below. KHC-6 OPERATING CONTROLS Tweeter Switch If installing in an acoustically bright room, such as some bathrooms and kitchens, you may want to adjust the tweeter level located on the front baffle. The position of this switch should always be checked prior to speaker module installation. Swivel Horn Tweeter The Klipsch KHC-6 features a swivel tweeter to aim high frequency sound. To aim sound directly at the listening area, simply remove the grille, and gently adjust the horn to the desired angle. DO NOT ATTEMPT TO TURN THE TWEETER STEM WHILE ADJUSTING THE SWIVEL TWEETER. KHC-6 SPEAKER PLACEMENT Designed to function in any ceiling or drop ceiling, Klipsch in-ceiling speakers are engineered for years of performance. Minimum construction requirements call for drywall or other mounting surfaces to be at least 3/8" thick. [. . . ] This Warranty does not cover cosmetic damage or damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or modification of, or to any part of, the product. This Warranty does not cover damage due to improper operation, maintenance or installation, or attempted repair by anyone other than KLIPSCH or a KLIPSCH dealer which is authorized to do KLIPSCH warranty work. REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE THE EXCLUSIVE REMEDY OF THE CONSUMER. KLIPSCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. [. . . ]