User manual KLIPSCH IGROOVE SXT

[. . . ] If it still won't fit, contact a qualified electrician to change the outlet, or use a different one. Do not attempt to bypass this safety feature. The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electrical shock to persons. WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus to rain or moisture. [. . . ] The iGroove SXT is a true two-way, stereo sound system incorporating two long-throw 2. 5'' (6. 4cm) woofers in a ported enclosure and two horn-loaded tweeters. This system provides the accuracy, detail and output that will bring your music to life as only Klipsch can. While your iPod is docked, its battery is charging (until it is fully charged). System Operation The Dock Your iGroove SXT system is ready to perform as soon as you plug it in and dock an iPod. The Power button located on the top right of the iGroove SXT will light up "Red" in "Standby/Off" mode and "Blue" in "On" mode. The volume up and down buttons are located to the left of the Power button on the top right of the iGroove SXT. Unpack the Box Unpack the entire contents of the shipping box and make sure you have the following items. 0 0 Mute Volume Down Volume Up Power iGroove SXT Remote Control 0 0 Note: When the iPod is docked and its headphone mini-jack is in use, audio will play through the headphones as well as the iGroove SXT. The iPod's volume control will adjust the headphone level only and will not have any effect on the volume of the iGroove SXT. The Remote Power Supply System Setup Universal Well Inserts The wireless remote control operates the iGroove SXT as well as the iPod. Note: The remote must be pointed at the iGroove SXT to guarantee proper interaction. Place the iGroove SXT on a sturdy surface. Plug the AC power cord (B) into the power supply and then into a standard wall outlet. Remote Buttons · Power ­ Press to turn the iGroove SXT "On"; press again to put the iGroove SXT in "Standby/Off. " This will also turn the iPod "Off. " · Play/Pause ­ Press once to "Pause" play; press again to resume play. · Track Selection ­ Press |7and8| to move to the previous or next track; press and hold to reverse or fast-forward through the current track. · Volume ­ Press + or ­ to increase or decrease the system volume level. Press again to restore the volume, or press a volume key. (A) (B) The iGroove SXT is intelligently designed to easily accommodate all iPods using the Apple 30-pin connector. To configure the iGroove SXT for your specific iPod size, simply place the appropriate dock insert into the dock area as shown below. Use the universal well insert that came with your iPod, or choose one of the three inserts provided. Power Play/Pause Mute Volume Up Back Forward Volume Down 2 Changing the Remote Control Battery The remote battery will need to be changed when it stops working or when its performance is noticeably reduced. To remove the battery, simply pull the battery housing tab from the remote control (as shown in the diagram) and remove the battery. Replace only with a 3-volt CR2032 lithium battery. Note: Lighting and other room conditions can reduce remote performance. S-Video Output The iGroove SXT has an S-video output on the rear of the unit. This output can be used to send the iPod's video content to an external screen. To view a photo, use the slideshow feature of the iPod, which will send video to the S-video cable. Aux Input The Aux input located on the rear of the iGroove SXT allows you to connect other audio devices to the system. Simply connect the audio out (headphone) of the source to the Aux input of the iGroove SXT. A 3. 5mm stereo mini cable (not included) must be used for proper operation. 3 Warranty ­ U. S. and Canada The Warranty below is valid only for sales to consumers in the United States or Canada. ("KLIPSCH") warrants this product to be free from defects in materials and workmanship (subject to the terms set forth below) for a period of one (1) year from the date of purchase. [. . . ] Warranty Outside the United States and Canada The Warranty on this product if it is sold to a consumer outside of the United States or Canada shall comply with applicable law. To obtain any applicable warranty service, please contact the dealer from which you purchased this product, or the distributor that supplied this product. Operation is subject to the following two: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ]